The HP H10i is a wireless headset with active noise cancellation, here's how to set it up:
< br >
Set the headphone switch to the On state, the headphone prompts and begins to search for Bluetooth devices.
Turn on the noise-cancelling function: Press and hold the noise-cancelling button on the right ear for 2 seconds, and the headset tone will indicate that the noise-cancelling function is turned on.
Turn off the noise-cancelling function: Press and hold the noise-cancelling button on the right ear again for 2 seconds. The headset tone will indicate that the noise-cancelling function is turned off.
< br >
It is recommended to use the noise reduction feature in the following scenarios for better results:
< br >
Travel by means of transport, such as plane, bus or train.
In a noisy environment, such as in a cafe, city centre or construction site.
When concentration is needed, such as in the library, learning center or office.
< br >
It is worth noting that the noise cancellation function consumes more of the headset's battery, so it is recommended to turn off the function when the noise cancellation is not needed to save power and extend the service life of the headset.
1. Noise reduction can be set.
2. Because the HP h10i headset has built-in active noise cancellation technology, the noise reduction function can be turned on or off by setting.
3. The method of setting the noise reduction of HP h10i headset is as follows: First, connect the headset to the device, then turn on the Bluetooth setting of the device, find the connected headset, click on the headset Settings page, find the \"noise reduction\" option, and turn on or off the noise reduction function.
It should be noted that turning on the noise reduction function will consume more power, and it is necessary to pay attention to the remaining power when using.
HP h10i headset set noise reduction method:
1. Connect your headphones to your phone.
2, open the Settings function in the phone, click the \"Bluetooth\" option.
3. Click the \"Little exclamation mark\" icon on the back of the headset.
4. Click \"Noise Reduction\" to open the noise reduction mode.
In addition, you can also drop down to open the \"Control Center\" and long press the volume slider to switch between noise reduction and transparency mode.