There are several possible reasons for this:
1. The distance between the wireless charger and iPhone 14 is too far or the Angle is incorrect. Wireless charging requires the iPhone 14 to be close to the surface of the charger, and the charging coils on the back of both are aligned. If the distance is too far or the Angle is not right, it may lead to ineffective charging.
2. The charging coil of the wireless charger is damaged. After prolonged use, the charging coil may be damaged, resulting in the failure of the wireless charging function. A new wireless charger may be needed.
3. The wireless charging coil module of the iPhone 14 is damaged. The iPhone 14's own wireless charging hardware can also be problematic, and may need to be repaired or replaced if the charger is detected but is unable to perform normal wireless charging.
4. The charging environment is subject to external interference. Sometimes the magnetic field or radiation generated by other electronic devices in the wireless charging environment will interfere with wireless charging, leading to charging failure or poor effect. This requires adjusting the charging environment away from other electronic devices.
5. The software is abnormal. Sometimes after the iPhone system software is upgraded, there will be some bugs that cause the wireless charging function to be abnormal. This is usually fixed some time after the release of a new updated version of iOS, which can be restored after the upgrade. If the wireless charging function still does not respond after taking the above measures, it may be a hardware fault of the iPhone 14 or the charger itself.
The iPhone 14 wireless charger may not be fully charged for several reasons:
1. The charger is not correctly connected to the power socket or the power cord is damaged;
2. Poor contact between the charger and the device, which may be caused by dust or dirt;
3. The wireless charging function of the device may be turned off and needs to be turned on in the Settings;
4. If the device or charger fails, contact the after-sales service for repair or replacement.
First of all, check whether the power adapter input to the wireless charger is positive
< br >
often
< br >
(2) Check whether there is bad contact inside the entire charging data cable
< br >
elephant
< br >
(3) Check whether there are problems such as poor contact between the charging data cable plug and the wireless charger input interface.
< br >
If the above checks are normal, the problem may be the wireless charger internal circuit is abnormal or damaged, and so on.
The Apple 14 wireless charging pad does not respond due to a variety of reasons
1. Please check whether the back center of the phone is placed in the center of the wireless charging board.
2. When there are inclusions between the mobile phone and the wireless charging board, it may not be able to charge normally.
3. Check the back of the phone. If the protective phone cover used is too thick may hinder wireless charging, it is recommended to remove the phone cover and try to recharge.
4. Please use the original Samsung charger. If you use a non-original charger, you may not be able to charge normally.
5. Connect the phone directly to the wired charger to check whether it can be charged normally.