The correct charging method is to put the Bluetooth fourth generation headset into the charging bin, ensure that the charging bin and the headset are in good contact, plug in the charging cable, plug the charging cable into the power supply, and start charging.
When charging is complete, the indicator light of the charging bay will change from red to green.
Bluetooth 4 headset with wireless charging technology and high-capacity battery, can be used for a long time in a single charge.
When charging, it is necessary to pay attention to the good contact of the charging bin and plug in the charging cable and plug in the power supply, otherwise it will lead to charging failure.
It is recommended to use the original charging cable and power supply for charging, avoid using inappropriate chargers.
In addition, after each use, the headset should be put back into the charging bin to charge, to avoid the situation of no power can not be used.
At the same time, overcharging will also affect the battery life, it is recommended to unplug the charging cable after the charging light turns green.
The correct charging method is to put the headset back into the charging compartment and ensure that there is no foreign matter in the charging compartment. After connecting the power, wait for the indicator to light up to start charging. After charging is completed, the indicator can be extinguished. A special charging circuit is designed inside the Bluetooth fourth headset charging compartment, and is matched with the headset. Only after the headset is correctly placed can this charging circuit be used for charging. When the charging indicator lights up, it means that the charging is being done.
The charging port and charging cable of the charging bin also need to be kept clean to avoid foreign matter entering or causing circuit short circuit.
At the same time, it is necessary to pay attention to the correct storage method to avoid impact or water flooding of the charging bin. This can extend the service life of the charging bay and headphones, and also better protect the safety of users.
1 The correct charging method is: put the Bluetooth fourth headset into the charging compartment and plug in the charger, and wait for the charging indicator to light up, indicating that the headset is charging.
When the light turns green, it means that the headset is fully charged and ready to be taken out and used.
2 This is because the Bluetooth fourth headset charging compartment is equipped with lithium-ion batteries, which need to be charged correctly using the charger.
If the voltage or current of the charger is not correct, it is easy to cause damage to the battery, affecting the battery life or use effect.
3 In addition, in order to extend the service life of the fourth generation Bluetooth headset, attention should also be paid to the standardized use of the charger for charging in daily use, to avoid long-term overcharging or excessive discharge, and regularly clean the charging terminal and headphone interface.
1 The correct charging method is to put the headset into the charging bin, and ensure that the charging bin is well connected to the power supply, and wait for the headset to be fully charged.
2 Bluetooth fourth generation earphone charging bin adopts wireless charging technology, charging requires good contact between the charging bin and the power supply, after putting in the earphone, the earphone will automatically charge, until the power is full, the charging bin will stop charging and keep charging state.
3 Note: Do not let the charging compartment and headphones in a high temperature or humid environment for a long time, do not use too strong power to charge, to avoid battery damage.
1 The correct charging method is to insert the Bluetooth 4 headset charging compartment into the charging cable and connect the power supply, and then wait for the charging indicator to light up, indicating that the headset charging compartment is charging.
2 If the charging indicator is not on, the charging cable may not be properly connected, or there is a fault inside the charging bin. You need to rectify the fault before charging. In addition, in order to extend the service life of the fourth generation Bluetooth headset, it is recommended not to charge more than 2 hours per charge, and try to use the original charger when possible to avoid damage to the charging of the headset due to the mismatch of voltage and current.
The correct charging method of the Bluetooth headset charging bin is described as follows:
< br >
1. Ensure that the charging capacity of the headset is sufficient. If the battery capacity in the headset is less than 20%, it should be charged in time;
2. Use the original headphone charging cable (or other charging cable that supports the current headphone charging port) to connect the charging bin to the power supply;
3. After connection, make sure that the indicator light of the charging compartment is on to indicate that it is charging;
4. During the charging process, if the indicator flashes, there is a problem with the power supply of the charging bin, it is recommended to use other power to reconnect;
5. When the indicator is off, the charging is complete.
The correct way to charge is to put the headset in the charging bay, make sure the charging bay is connected to the power supply, and wait for the charging indicator to light up.
The power supply of the charging bin can be a computer USB interface, a charging bank or a socket power supply.
It should be noted that do not overcharge when charging, and do not let the power is too low, it is recommended to use the indicator to judge the charging state to protect the battery life and safety.
In addition, when the charging bay and headphones are not used for a long time, they need to be charged in time to maintain battery life.
The fourth generation Bluetooth headset can be charged via a USB charging cable.
Specifically, you need to first put the headset into the charging case, and connect the charging case to the power supply through the USB charging cable, if it is the first time to use, you need to first pair the charging case and the headset connection.
During the charging process, the charging case will have the corresponding indicator light, when the headset is fully charged, the indicator light will turn green.
It is worth noting that the charging case also needs to be kept charged at any time to ensure that the headset can be charged at any time.
At the same time, if you want to extend the service life of the headset, you need to pay attention not to overcharge for a long time, and avoid frequent charging.
Charging method is as follows:
< br >
When charging, after opening the cover of the charging case, the indicator will show green. If you want to charge the AirPods earphones, as long as there is remaining power in the charging case, the earphones can be charged in the charging case.
< br >
You can know the charging status by the indicator light on the charging case. Green: indicates that the battery is fully charged. Amber: The remaining battery in the charging case is not enough to fully charge the AirPods.
< br >
When the iPhone's screen lights up, open the cover of the charging case and you'll see the charge.
1 The correct charging method is very important, which can ensure the life and use effect of the fourth generation Bluetooth headset charging bin.
2 First of all, it is necessary to use the original charger or a charger that meets the same voltage and current specifications to charge, to avoid overcharging or overdischarging the battery and causing damage. Second, correctly connect the earphone charging bin and charger, ensure that the battery power in the charging bin reaches the corresponding charging amount and unplug the charger in time, and do not put the charging bin in a high temperature, humid, near the magnetic items.
3 In addition, it is recommended not to charge frequently to avoid battery aging, it is best to charge when the battery is low, so as to maintain the best state of the battery and improve the service life.
It should be noted that this is only some general recommendations, the specific charging method should also refer to the instruction manual of the headset charging bin, and operate correctly.
Use headphones when there is no electricity, remove the headphones. Then put into the charging bin, you can use one by one, one by one headset charge, you can.
Cover the lid, the charging bay shows green indicating that the charging bay has electricity, put the headset in to charge for a while, the red light does not flash and the charging is completed. If there is no power in the charging bay, connect the usb cable and prepare to charge.
Take a charging head, connect the usb cable, connect it to the power supply, the red light of the charging bin does not flash, the charging bin is full, and the headset is also full, you can remove and use the headset.
The answers are as follows: 1. Ensure that the charging bay battery is fully charged. Before charging, it is best to fully charge the charging bay to ensure that the headset battery can be fully charged.
2. Place the headphones in the charging bay. Align the earphone with the port in the charging bay and gently push it in until the earphone is firmly in contact with the charging bay.
3. Check the charging indicator. During the charging process, the indicator light on the charging bay usually lights up to indicate the charging status. If the indicator light is not on, it may be that the charging bin is not plugged in or the charging bin is fully charged.
4. Complete charging. The charging time depends on the size of the headphone battery and the charging bay battery. Usually, it takes 1-2 hours to fully charge the charging bay and headset batteries.
5. Take out the earphones. After a full charge, gently pull out the headphones so you can start using them.
The answer is as follows: 1. First, connect the charging bin to the power adapter or USB port of the computer to ensure that the power supply is normal.
2. Place the Bluetooth headset in the charging compartment and align the contact points to ensure that the headset and charging compartment are in good contact.
3. Confirm that the LED light of the charging bay is on, indicating that the charging starts. When the headset is fully charged, the LED light will be turned off or turn green.
4. It is recommended to put the Bluetooth headset back into the charging bin for charging before each use to ensure sufficient power of the headset and extend the use time.
5, pay attention to avoid overcharging, the general earphone charging power reached about 90% can stop charging, so as not to affect the battery life.
6. If you do not use the Bluetooth headset for a long time, it is recommended to store it in the charging bin to fully charge and maintain the power, so as not to affect the battery life.
1. Under normal circumstances, the Bluetooth fourth generation headphone charging bin can be connected to the power adapter or computer through the USB interface for charging, but it should be noted that in the charging process to ensure that the charging bin and the power adapter or computer connection is stable to avoid abnormal charging.
2. When the charging compartment of the fourth generation Bluetooth headset is powered on, its status light will light up, indicating that it is charging. When the light of the charging compartment turns green, it indicates that the charging is complete. 3. For each charge, it is recommended to separate the charging bin from the Bluetooth headset, and first fully charge the charging bin and then put the headset into the charging bin for charging to avoid insufficient charging due to continuous operation. In addition, be careful not to place the charging bin in a high temperature or humid environment, so as not to affect the charging effect or damage the charging bin.
For this problem, 1. First put the Bluetooth headset into the charging bin, making sure that the metal contact points of the charging bin and the headset are aligned.
2. Connect the power cable to the charging bay, and insert the power cable into the charging port of the charging bay.
3. Observe the indicator light on the charging bay. If the indicator light is on, the charging bay has started working.
4. During the charging process, the headset light will flash, indicating that it is charging.
5. When the earphone is charged, the indicator light of the charging bin will be turned off, and the earphone can be removed from the charging bin for use.
6. If the charging bin is not used for a long time, it is recommended to unplug the power cord after it is fully charged to avoid wasting power and affecting the life of the charging bin.
Note: During the charging process, it is recommended to place the charging bin in a well-ventilated place to avoid overheating affecting the charging effect and the service life of the charging bin.
First, the two Bluetooth headphones in the warehouse were removed, the cover was closed, and the charger was connected to the charging cable for charging, which took about two hours.
< br >
2. After charging the charging room, you can put two Bluetooth headsets into the charging room. After an hour in the charging room, the two Bluetooth headphones were nearly full.
< br >
3. Turn on your phone's Bluetooth. If you previously needed a default connection, ignore it.
< br >
4. Take out the Bluetooth headset and turn it on at the same time. When the red and blue lights alternately flash, press one of the headphones twice continuously to pair it.
< br >
5. After the pairing is successful, the light of one headset will be extinguished. If it is not extinguished, it indicates that the pairing has not been successful and needs to be operated again.
< br >
6, the above is the opening method of binaural Bluetooth, if you only need a single Bluetooth headset to work, separately connect the mobile phone Bluetooth.