Hello! Apple wireless charging is not satisfied, under normal circumstances, because the battery overheating triggered the protection mechanism, Apple mobile phone will heat up when charging, in order to extend the service life of the battery, if the battery is too hot software may limit charging after the power reaches 80%, when the temperature drops again, it is necessary to move the phone and charger to a cooler location. Or unplug the power and wait for natural cooling before charging. Therefore, usually do not charge while turning on the hot spot or charging while playing games, or even the environment is too hot, which may lead to the battery of the Apple phone can not be charged continuously.
< br >
2, you can use the phone to automatically shut down the battery, and then charge, do not use the phone during the whole process, until the battery is turned on after full power, the phone will calibrate the battery to solve this problem.
The following reasons may cause Apple wireless charging dissatisfaction:
1. The charger power is insufficient or the charging cable is loose, resulting in slow charging speed;
2. The quality of the charger or charging cable is not good, resulting in poor charging effect;
3. There are some physical barriers between the charger or charging cable and the mobile phone, such as metal objects, which affect the wireless charging effect;
4. Aging mobile phone batteries, resulting in slow charging or can not be fully charged.
If you encounter this situation, you can try to replace the charger or charging cable, or remove the physical barrier between the phone and the charger, if the problem still exists, you can consider replacing the phone battery.
Apple wireless charging dissatisfaction may be caused by the following reasons. 1. The power of the charging bank is too small or is not the default Apple adapter: the wireless charging power of the Apple smart machine is 2W, and the use of a charging bank lower than 2W or any charger that is not the default Apple adapter will not be full. 2. Discharge caused by unaligned charging state: The alignment between the charging bank and the intelligent machine is very important, if the alignment is not good enough, it will also lead to the data line not charging or charging time is too long and not fully charged. 3. Charging quality such as poor contact, battery failure and other problems will affect the charging efficiency, and even lead to insufficient charging. In summary, there may be many reasons for Apple wireless charging dissatisfaction, and it is necessary to check one by one to find a solution.
There may be several reasons why Apple wireless charging is not satisfied:
1. The charger power is insufficient, it is recommended to use the original charger or a charger with a power greater than 10W;
2. The distance between the charger and the phone is too far, it is recommended to shorten the distance between the phone and the charger;
3. There are metal items or magnetic items on the back of the phone, it is recommended to remove these items;
4. The battery of the mobile phone is aging. Replace the battery. If the above methods can not solve the problem, it is recommended to contact Apple customer service or Apple authorized repair point for repair.
Dissatisfaction with wireless charging is usually caused by the following reasons: 1. Impurities such as grid and dust may block the charging port on the charging board or mobile phone, affecting the charging effect, so it should be removed regularly.
2. Some mobile phone cases, mobile phone accessories or external magnetic fields may affect the charging effect, and it is necessary to remove the mobile phone from the shell or accessories and then charge it.
3. Many factors such as power consumption, power consumption and charging effect may also affect the charging effect.
In the process of use, you should always pay attention to the phone power and charging progress, to avoid the phone power is too low or the charging time is too long.
Therefore, in order to avoid this situation, we can properly adjust the charging position, clean the charging board and port, and avoid affecting the charging effect.
It may be due to a number of reasons, it is recommended that you try the following:
< br >
1. Please check whether the back center of the phone is placed in the center of the wireless charging board.
< br >
2. When there are inclusions between the mobile phone and the wireless charging board, it may not be able to charge normally.
< br >
3. Check the back of the phone. If the protective phone cover used is too thick may hinder wireless charging, it is recommended to remove the phone cover and try to recharge
Regarding this problem, there may be the following reasons:
1. Charger problem: If you use a wireless charger that is not officially certified by Apple, the charge may not be full.
2. Power problem: If the power supply connected to the charger is unstable or the voltage is not enough, it will also affect the charging effect.
3. Hardware problems: If the wireless charging function of Apple devices fails, it will also lead to incomplete charging.
4. Software problem: Sometimes the software problem of the device will also lead to insufficient charging, you can try to restart the device or update the system to solve it.
If the above methods do not solve the problem, it is recommended to contact Apple customer service or go to Apple authorized service provider for repair.