1. Network set-top box remote control battery no power, try to replace a new full battery.
< br >
2. The receiver in the network set-top box is faulty. If it is broadcast television, it can be replaced or repaired by the business hall. If it is a network set-top box, you can find a merchant to check or send to the maintenance station for maintenance.
< br >
3. The failure of the network set-top box remote control itself is usually damaged by internal components (crystal vibration is usually easily damaged). If you press any button of the remote control of the network set-top box and the red light of the receiver of the set-top box is not on, it can be determined that the crystal vibration is damaged), you can go to the maintenance department for repair. If it is a radio and TV set-top box, you can buy a new one at their business hall or have it repaired by them.
< br >
4. Generally speaking, there will be a red \"standby\" button above the remote control of the network set-top box, through which we can use it to control the switch of the set-top box. Some set-top boxes are also equipped with an email button to view emails sent to us by the system. At the same time, the back button on the remote control can return to the previous level of operation or cancel the number entered incorrectly.
< br >
5. The network set-top box remote control battery has power, but can not be used. At this point, you can check whether the contact power of the remote control is invalid. In general, if the battery contactor placed on the remote control rusts, it will lead to the failure of the network set-top box remote control. At this point, you just need to repolish it.
< br >
6. If the fault of the network set-top box remote control mainly occurs on the circuit board or the circuit board in the remote control is damaged, it is best to see if you can buy a universal remote control or a network set-top box remote control with the same model in the appliance maintenance department
Network TV set-top box remote control failure solution is as follows.
1, if the spirit is not working, or the sensitivity is not enough, it is likely to be due to the battery is out of power, if the use is a general No. 5 or No. 7 battery, you can replace a new try;
2, open the camera of the mobile phone to the infrared module of the remote control, press any key on the remote control, see whether the white light is emitted, if you can see, it means that the remote control can be used normally;
3, if the remote control of a key failure, may be due to poor contact on the circuit board, you can disassemble the remote control, wipe the metal contact on the circuit board with a rubber;
4, after the above exclusion, the set-top box still can not be normal remote control, may be due to the problem at the receiving end of the set-top box, you can only consult the after-sales service personnel of the set-top box, contact maintenance or direct replacement;
5, in addition, you can also download the mobile phone remote control software control, the method of connecting the TV is also very simple, the condition is that the phone and the box are in the same wifi network, the mobile phone download and install the software after the software is opened to search for the IP address of the device, confirm the connection, and the mobile phone will automatically push the installation of this software to the box, and then you can remote control the connected device.
1. If the spirit, the time is not good, or the sensitivity is not enough, 90% May be the battery is out of power, if the use is the fifth battery, Shuanglu battery one yuan a unit, can be used in the remote control for 1-3 months, if it is the Nanfu battery (genuine products bought in large shopping malls) can be used for 3-6 months. If it is a button battery 2032 or 2025, the domestic price of 5-10 yuan, can only be used for about a month, if it is fast Master, Panasonic, or Nanfu brand can be used for 1-3 months.
2. If the remote control, water, sprinkle water, first deduct the battery, then disassemble, blow with a hair dryer, and then install it can continue to use.
3. If a key (basically the middle OK key) fails, after disassembling, the corresponding key position will be pad with something (sometimes useful), in this case, try to replace the remote control.
4. In the case of remote control loss or complete damage, if there is a millet mobile phone (or a mobile phone with infrared function) download universal remote control can directly control the network set-top box.
5. If the phone does not support the infrared function, download the Wukong remote control directly and directly control the network set-top box. (Other remote control software also works.)
6. Plug the wireless mouse receiver directly into the USB, and control the network set-top box with the mouse.