Xiaomi watch how to charge
First of all, take off the millet watch, remove the grain of rice embedded in the groove of the bad belt in the hand, and gently press the button on the back of the watch, carefully take out the body of the millet watch from the edge of the band slowly.
Then, prepare the watch charger specially equipped with Xiaomi, gently place the metal contact side into the U-shaped slot of the charging cable, and check whether it is inserted tightly and not shaken.
Then, plug the other end of the USB into the computer or charging bank, and the display on the surface of the watch will light up to indicate that it is charging.
When the Xiaomi watch is charging, the watch will show the power, the watch charging animation is not moving, indicating that the power is full, then you can remove the power and then restore the use of the watch.
When charging, the charging indicator will also flash and light up, when the three indicators of the Xiaomi watch are lit up, it means that the Xiaomi watch has been recharged. At this point, you need to unplug the charger and reinstall the Xiaomi watch body
The charging method of Xiaomi Watch S1 is as follows:
< br >
1. Use the original USB magnetic charger. Plug the USB magnetic charger into the power adapter, and then touch the guide pin of the Mi Watch S1 to the magnetic port on the charger to start charging. Note: Keep the guide needle and magnetic suction port clean and dry when using.
< br >
2. When the Xiaomi watch S1 is connected to the USB port for data transmission, it can also be charged. When the Mi Watch S1 is connected to a computer, laptop and other devices, the system will prompt you whether to open the USB debugging mode, which can complete data transmission and simultaneous charging.
< br >
It should be noted that before using any charging method, please ensure that the guide pin and magnetic suction port of the Xiaomi watch S1 are clean, free of substances such as water or dirt, and do not pull or twist the guide pin.