1. Networking Settings
< br \/ >
First, connect the bath bar to the power supply, and then long press the emergency\/distribution button for distribution network. The device addition of Mijia APP is basically the same, so there is no more explanation here. Follow the prompts step by step, but it should be noted that YEELIGHT smart bath only supports 2.4G wireless network.
< br \/ >
The pairing of the remote control is also more convenient, in the case of the bath power, press the wind direction and wind button on the remote control at the same time, you can start the code pairing, and the corresponding remote control device will appear in the APP after the pairing is completed. Of course, from the name \"remote control and switch\
< br \/ >
In fact, the use of remote control need not be introduced, in addition to the wind direction button is invalid (for the PRO version of the function), the rest are literal, I believe that everyone can see at a glance, and the lighting button in addition to click the switch lighting, in the night light mode can also be long according to the light key to exit the night light mode.
< br \/ >
Yeelight smart bath in the process of use, the display will display the corresponding function of the state pattern, temperature and other content. Users can easily determine the current working mode of the root pattern. The following are: warm air, ventilation, blowing state.
1. First, plug the receiver and smart switch of the bath ba into the socket.
2. After the power supply is turned on, if the switch panel power light is on, the receiver and the smart switch are connected to the power supply.
3, then press the button behind the receiver, after the prompt sound.
4. Turn on the power button of the smart switch.
5, then disconnect the power socket, re-open the smart switch, the code is completed.