The procedure for configuring the connected bridge on a Huawei router is as follows:
< br >
1. Connect the LAN port of the primary router to the WAN port of the secondary router through a network cable.
< br >
2. Connect your computer or mobile phone to the wireless network of the secondary router or to the LAN port of the secondary router through the network cable.
< br >
3. Open the browser, enter the default management IP address of the secondary router, usually 192.168.3.1 or 192.168.1.1, and press Enter to go to the login page.
< br >
4. Enter the administrator account and password of the secondary router to log in.
< br >
5. On the management page, select Network Settings or access Settings, select the bridge mode, and set the corresponding parameters.
< br >
6. In bridge mode, you may need to set the connection type of the WAN port, choose to automatically obtain IP address or manually enter information such as IP address, subnet mask, default gateway and DNS server.
< br >
7. After confirming and saving the Settings, restart the secondary router.
< br >
8. The primary router will provide network signals to the secondary router, and the secondary router will transmit network signals to the device through wired mode.
< br >
Note that the preceding steps only apply to the general configuration of Huawei routers. The specific steps may vary depending on the model or firmware version. Before setting the router, you are advised to consult the user manual of the Huawei router or the technical support documents on the official website to ensure that you have obtained the most accurate and detailed information.