Take mobile 3G network to wifi as an example
Usually the setting of the mobile power supply, unlike the ordinary wireless router, connect the computer and the router with a network cable, and then log in to the computer through the browser to set up. Mobile power is generally accessed through wireless, that is, connect to WiFi first and then access.
Press and hold the switch on the mobile power supply for a few seconds until the blinking light comes on, which turns on the 3G routing function
Then search for the WiFi hotspot from the power supply on the computer and enter the password to log in
There are default hotspot passwords in the instructions, many of which default to 12345678
Usually on the back of the mobile power supply, there is a default SSID (hot spot name)
Enter the login IP address in the browser, and press Enter
Usually on the back of the mobile power supply, there is its login IP address
In the page that appears, click PPPoE, which is the most common way for home broadband Internet access
On the PPPoE mode page, set the user name and password provided by the network cable carrier
Run mode Select Permanent connection
Click [WiFi Security Settings] on the main interface
In the wireless network line security Settings page, select security mode [WPAPSKWPA2PSK], and enter the password, OK
Then plug the network cable into the RJ45 network port of the mobile power supply, that is, the LAN\/WAN port
At this point, the setup is complete.
Use a computer or other mobile device to search for the hot signal of the power supply, enter the new password that has just been set, and you should be able to surf the Internet normally
WIFI mobile power supply is a high-tech product that mainly integrates the function of mobile power supply, 3G to WIFI function, wired dial-up to WIFI, that is, wireless router function. Compared with the general mobile power supply, the volume is similar but the function is quite powerful, the signal is stable, and it is suitable for business trips, tourism, hotels and other occasions.
It is plugged into the charging bank through the Android jack, and the other end of the USB is connected to the socket. Some power supplies have light prompts. Charge it well and then connect the USB to the charging bank and plug the phone into the other side.