The installation method of the electric vehicle mobile phone charging bank bracket is as follows: 1. Prepare all parts of the bracket, and then complete the installation step by step.
2. First of all, it is recommended to choose good quality bracket materials to ensure that the mobile phone bracket is firm and not easy to loose after installation; Secondly, the installation steps of the electric vehicle mobile phone charging bank bracket are also very important, and if it is improperly operated, it may cause damage to the mobile phone and electric vehicle. 3. The specific installation steps generally include the following steps: - The first step, clean the installation position, place the bracket in the center of the handlebar, and fix it with screws; - The second step, connect the mobile phone base to the stand, pay attention to not loose, to ensure the stability of the mobile phone; - The third step, the phone and the charging bank are connected with the data cable, and then fixed on the phone base, and finally unplug to complete the installation.
The first clear conclusion is that the installation method of the electric vehicle mobile phone charging bank bracket is very simple.
The following materials have been obtained: Mobile phone charging bank bracket, screwdriver, and base of electric vehicle frame.
The mobile phone charging bank bracket is installed on the electric car to facilitate the use of mobile phone navigation or charging while riding.
The installation method is simple, only need to fix the bracket on the base of the frame, and then fix the base on the electric vehicle frame.
In the purchase of electric car mobile phone charging bank stand, should be based on the size of their own mobile phone and frame size to choose the appropriate size, to avoid instability or installation of the situation. In addition, in order to ensure safety, care should be taken not to check the phone or use the power bank too often while riding.
The installation of electric vehicle mobile phone charging bank bracket needs to be carried out according to different electric vehicles and bracket brands.
1. Different brands of electric vehicle mobile phone charging bank brackets, installation methods and required installation tools may be different; 2. The frame structure of different electric vehicle models is also different, and its stability and safety should be taken into account when installing the bracket, so special adjustment and fixing of the bracket may be required.
Before installing the electric vehicle mobile phone charging bank bracket, it is recommended to check the installation manual of the bracket, understand the frame structure of your own electric vehicle, and choose a bracket suitable for your own electric vehicle.
Professional help is available if needed.
After the installation is completed, it is necessary to maintain its stability to avoid shaking during operation, affecting the safety of driving.
The answer is as follows: 1. Confirm the model of the mobile phone charging bank bracket and the size of the electric vehicle frame, and select the appropriate bracket.
2. Open the two claws of the bracket and place them on the frame, so that the claws are stuck on the frame as much as possible, and then fix the claws on the frame with screws.
3. Place the mobile phone charging bank on the stand, connect the charging cable to the mobile phone, then place the charging bank on the stand, and fix the charging bank on the stand with clips.
4. Confirm that the charging bank is firm, and then adjust the Angle of the stand so that the charging port of the phone and the charging bank are aligned.
5. Confirm that the support is firm, and then you can start riding. Pay attention to safety when charging to avoid falling and damaging the charging bank.
one
Take out the electric vehicle mobile phone bracket, insert the base into the handle, if the handle is small, you can use the rubber pad provided with the product to strengthen it.
two
Tighten the base screw, adjust it to the appropriate Angle, and then tighten the screw to fix the base.
three
Install the support on the base, adjust the Angle and tighten the ball nut with the flat side of the nut facing up.
four
Press the button switch of the expansion clip to release the support, then put the mobile phone on, and press the left and right clip arms to fix the mobile phone.
five
Adjust the nut, rotate the bracket to the appropriate use Angle and tighten it, and the installation of the electric mobile phone bracket is completed