The charging instructions for the sanag Bluetooth headset are as follows
1, the special charger with Bluetooth headset, if there is no special charger, build a suitable charger can also be charged, but not a special charger to interface the same, and rated output power of the same charger can be used.
< br >
2, remember to plug the charger when charging, do not only plug in more than half, because if you do so for a long time, it will damage the headset. And when inserting and unplugging the charging plug, you should also hold the plug by hand and unplug it, and it should be light, and you can not pull the plug by holding the line by hand, which will cause the plug to loose.
< br >
3, in order to save time to make the Bluetooth headset fast charging, do not plug the Bluetooth headset into the base or charging box to charge, because this charging is longer than charging directly to the Bluetooth headset. When charging, align the charging cable with the hole in the base and plug it in. The charging method is the same as charging the headset directly.
< br >
4, after charging, when charging, the charger shows a red display light. When the charging is complete, the indicator light is blue, and the charging is complete at this time, you can remove the charger.
< br >
5, try to use the headset while charging, should be used when charging the Bluetooth headset is easy to cause leakage or other problems, resulting in accidental damage and safety problems.
sanag Bluetooth headset charging instructions:
1. First, long press the multi-function key to turn on the Bluetooth headset;
< br >
2, then open the Settings of the phone, turn on the Bluetooth function, and detect the Bluetooth headset device;
< br >
3. Then click the device name of the Bluetooth headset. After the pairing is completed, the headset status on the mobile phone will become connected;
< br >
4, if click dial, will pop up the call mode selection, select the Bluetooth headset, you can use the Bluetooth headset to talk, sanag Bluetooth headset charging instructions successfully.
First, turn on. In the case of no power on, you only need to hold down the power button for about 10 seconds when the secondary indicator light is long on or the red and blue lights alternately flash. Don't let go when the Bluetooth light flashes. When the Bluetooth is connected to the paired device, the indicator will flicker.
< br >
Two, pairing. After the headset is turned on normally, the mobile phone search Bluetooth device can generally search for the headset in about 5 seconds, and then select the Bluetooth headset device you find on the mobile phone. The mobile phone will prompt you to enter the password. Universal password 0000.
< br >
Three, connection. When the phone searches for the headset and you enter the password correctly, it does not mean that your phone can use the Bluetooth headset. Many phones need to connect to the headset after finding the Bluetooth device.
< br >
4. Charging. The charging time of Bluetooth earphones is generally about 2 hours. Most Bluetooth earphones are charged when the red light is on and the rear light is off