Beisi data line can not flash charge due to the following reasons:
1. Insufficient charging power: Flash charging requires higher charging power to achieve fast charging, and the transmission capacity of Bex data line is limited, unable to provide enough current for flash charging.
2. Unreasonable data cable design: Bex data cable usually uses a thin wire and simple structure, which will limit the transmission capacity of the current, thus unable to meet the requirements of flash charging.
3. The power adapter does not match: In addition to the reason of the data cable, the flash charge also needs to be used with the appropriate power adapter. If you use a Bex data cable with a mismatched adapter, even if the adapter supports flash charging, the data cable will still become a bottleneck in charging speed.
Therefore, if you want to achieve flash charging, you should choose a data cable specifically designed for fast charging, and use it with the corresponding power adapter to ensure the stability of the charging power supply and transmission.
The data cable cannot flash charge because its design and material do not meet the requirements of flash charge technology. Flash charging technology requires the data line to have higher current transmission capacity and lower resistance in order to provide more current to the charging device in a short period of time. Bex data line may not meet these requirements, resulting in the inability to achieve flash charging function. Therefore, if the flash charging function is required, it is recommended to select a data cable that meets the flash charging standard.
Because the hardware configuration of the data cable does not support this function.