Check the water tank and water outlet: Make sure the water tank is properly installed and the water outlet is not blocked by dirt. Check whether the water in the tank is sufficient, water is insufficient, to add water. Check the status of the robot: ensure that the sweeping robot is in normal working condition, and not trapped, extended or charged. In some states, the robot does not release water by default.
Cause and solution: The water tank is not installed properly: Please check whether the water tank is correctly installed at the bottom of the robot. Water pipe not connected properly: PleaseCheck whether water pipe connections are loose or blocked. Water pump failure: If the water pump fails, the robot cannot spray water. The robot needs to be returned to the factory for repair. Low battery power: If the robot's battery power is too low, the robot will not be able to operate properly, and it will not be able to get out of the water at this time.
The vacuum sweeping robot does not water mainly because the water outlet is blocked with stains. Perform the following steps: Check whether the cleaning mode is automatic. The procedure for installing rags and supports is correct. Check whether the sweeping robot is in the trapped state, the extension state, the charging state, and the sweeping machine in some statesBy default, no water.
Does the subject want to ask "Cobos sweeping robot pump does not go out what happened"? The water tank is not installed and the water pipe is not connected. The water tank is not loaded. When the user uses the Cobos sweeping robot, the water tank is not installed, which will cause the water pump to get stuck, and the water tank can be installed again. The water pipe is not connected properly. When the user uses the Cobos sweeping robot, the water pipe is not connected well, which will cause the water pump to get stuck, and the water pipe can be connected and used.
After confirming the installation of the water tank and rag rack, hear the voice prompt "Rag rack has been installed", press the start button when starting up, and keep for 10 secondsCivil electrical products.
Belkin is a foreign brand recognized by Apple, its data line price is not much different from the original factory, and the quality is very good. Bull is a leading enterprise in the field of socket converters. Since its establishment in 1995, Bull has focused on the development, production and sales of civil electrical products with converters and wall switch sockets as the core. The company has more than 10,000 employees and has established nearly 1 million offline physical marketing networks and professional online e-commerce marketing networks.
Apple fast charging head good brands are: Nank South Carolina Nank South Carolina charging head C1 is recently super hot fast chargingThe first brand, some time ago, was evaluated by major digital media as the title of "the best charger for iPhone12 mobile phone" in 2021, and its network celebrity temperament and hot sales have been sublimated and affirmed once again.
1, degree constant temperature warming cup can be hot for 15 minutes. The cup sandwich stores micron heat transfer materials, using solid-liquid conversion to control the temperature, when hot water is added, the heat energy will be stored in the cup sandwich, so that the water temperature is reduced to 55 degrees, when the water temperature is lower than 55 degrees, it will be automatically releasedHeat, heat transfer material is pure physical phase change environmental protection material, please rest assured to use. Fast heat conduction and high heat storage efficiency. Qualified thermostatic coasters do not pose a hazard in proper use.
2. Pour boiling water at 100 degrees Celsius into the cup, tighten the lid, shake up and down for about 1 minute, and then unscrew the lid. The original boiling water in the cup quickly cools to drinkable warm water, and can be kept warm for about 3 hours. If the cup is filled with boiling water, the water temperature will slowly drop to about 55 ° C, if it is filled with cold water, it will slowly heat to about 55 ° C.
3, wireless charger heating reasons are as follows: wireless chargingHeat is normal when charging, but if it is hot, it is necessary to pay attention to whether there is a problem with product quality. The original wireless charger does not rule out possible faults. In addition, when charging, pay attention to whether the power of the wireless charger matches the mobile phone phase.