Please observe the earphone charging contact and charging caseWhether the electric shrapnel or probe is stained with oil/sweat or dirt, if so, try to clean it with a dust-free cloth or cotton swab. Tip: The charging contact is the only channel for the communication between the charging box and the headset. If the charging contact is poor due to dirt and other reasons, the headset will not be charged in the box, and the headset will be connected continuously with the cover closed.
The reason why the charging bin is fully charged does not charge the headset: the Bluetooth headset battery is exhausted, and it is excessively used, resulting in the battery being self-protected when charging. The earphones are not in place. You are advised to adjust the position and reinstall it. The charging port of the charging bin (or headset) is in poor contact. If the charging case (or headset)The safe charging of motor motorcycles and electric tricycles has higher charging efficiency than traditional wired charging, and the adaptive charging control algorithm can accurately identify the battery power matching voltage and current. The device reports a charging situation to the cloud every 5 seconds, which is full of self-breaking faults and self-breaking completely solves the problem of outdoor wired charging fire.
2. It may be. If the indicator light of the wireless charging mobile phone stand is on, the wireless charging is always in the working state, which will consume a certain amount of electricity of the vehicle battery. To prevent the car from running out of power, you can: turn off all electrical equipment in the car. Remove all external power supplies. Start every once in a whileThe vehicle charges the battery.
3, have an impact. The car wireless charging bracket may affect the compass function of the phone, navigation accuracy, battery life, etc., so it is sure to have an impact on the phone, but the impact can be large or small. If the magnetic adsorption is used, the impact may be larger, but if the ordinary physical structure is used, the impact is less.
4. No. Xiaomi wireless charger does not support motorcycles, for safety reasons, please do not use it on motorcycles.
5, in addition, the support frame of the vehicle bracket is very strongIt is strong, does not shake or drop, and can be adjusted to make you more comfortable when using. They can also be equipped with different clamps, which can be used in the car or on the table. Of course, there are other types of stands on the market, such as bicycle stands and motorcycle phone stands.
1, it is recommended that you unplug the charger after the mobile phone is fully charged to avoid long-term charging or long-term high power state to accelerate the aging of the battery to extend the batteryService life. (2) If the mobile phone is idle for a long time, it is recommended that the mobile phone is shut down and not regularly charged to maintain about 50% of the electricity. If the mobile phone is not used or charged for a long time, the battery may trigger over-discharge protection, resulting in abnormal charging or no charging.
2, precautions in daily use: Please use the official standard charger to charge the battery to ensure that the charging voltage is stable and in line with the standard. In theory, the battery power is maintained in the middle range of power for a long time (about 50%, such as 30%-70%), which is more helpful to extend the battery life, so: Please unplug the phone after it is fully charged, and the phone is high for a long timeThe state of charge will cause the depletion of the battery to accelerate.
3, try to avoid charging while using for a long time, especially in high-power operation scenarios (such as watching videos, playing large games, etc.), at this time, the mobile phone heating is intensified, and long-term charge and discharge at high temperature will accelerate the aging of the battery.
4, pay attention to the following matters in daily use to protect the mobile phone battery and extend the service life: Use the official standard charger to charge the battery, ensure that the charging voltage is stable and meets the standard, and avoid affecting the battery use.
5, the first three charging time must be more than 12 hours, in order to activate the battery. This statementIt is misled by the previous nickel-metal hydride battery, the mobile phone has been activated and aging before leaving the factory, and the user does not need to activate when using, nor do they charge for a long time of 12 hours.
1, good. Charge fast. Support 33W fast charge, charging faster. Good quality. Radish wireless charging mobile phone stand can be fixed at every Angle without pole rotation, CNC integrated molding process, better quality.
2, first from the official introductionZMI wireless charging car bracket Features: 20W MAX wireless fast charging mobile phone without connection, a release is charged, zinc alloy clip arm one-hand operation automatically tightens, intelligent compatible with a variety of models, universal rotating ball 360 free adjustment, priced at 139 yuan. Generally speaking, there is little difference with the previous Xiaomi, which is a manufacturer's product, but the hand will feel that there are still some differences in some workmanship details.
3, safety work handled well, no burrs; The material used is very thick, also environmentally friendly, no odor; Flexible installation, use will not block the line of sight, safety is guaranteedBarrier.
4, if you just want to buy a cooling back clip, then the cheaper black shark ice cooling back clip 2 magnetic version is more suitable.