Rod Bee loudspeaker is generally used 5V/600-800mAh charger, battery capacity is 8000 MA, the average charge takes two hours, one time can be used for one to two days, charging time is short, long use time is loved by people. The Rod Bee receiver is fully charged and disconnected from the charger.
Theoretically it's OK, but do it this wayIf so, first, it will reduce the service life of the built-in lithium battery, second, it is easy to burn out the circuit system, and third, and the most dangerous, the battery may overheat and cause an explosion.
Can be rechargeable, the correct use of the battery is: the first use of the battery to run out of battery power, fully develop the capacity limit of the battery. Later charges can be charged before they run out. This can effectively extend the battery life.
Abstract: The small bee loudspeaker is generally a built-in rechargeable battery, can be charged to use, charging the charger connected to the small bee charging jack, and then plug inThe electric time is about 4-6 hours to be fully charged.
2, Rod bee loudspeaker is generally used 5V/600-800mAh charger, battery capacity is 8000 MA, the average charge takes two hours, one time can be used for one to two days, charging time is short, long use time is loved by people. The Rod Bee receiver is fully charged and disconnected from the charger.
3, the ordinary small bee loudspeaker is generally used 5V/600-800mAh charger, charging time according to the power of the charger and small bee loudspeakerGenerally, each charge time is about 4-6 hours to be full.
4, ma small bees can use more than 40 hours. The SONY Ericsson S-350 Bluetooth Bee speaker has a 400mAh large-capacity battery that can last up to 40 hours after a full charge. Take A 5 V 2 A charger and charge it for two hours.
5, the mobile phone charger generally output 5V voltage, if the rated input voltage of the small bee loudspeaker is 5V, then you can use the mobile phone charger to charge. However, the output current of the phone charger may be small, generally 500-800mA or so, if the rated input current of the small bee loudspeaker is large, then charging with a mobile phone charger may be slow. It is recommended to use a charger with a large output current to avoid the problem of slow charging.
6, the amplifier charger is generally DC5V 500MA generally do not give the charger drop! A universal USB charging cable is included as standard.
RODE microphone WirelessgoIIThe second generation. The RODE microphone WirelessgoII II is a wireless bee receiver that can be used while charging, and the radio effect is very good. The small bee receiver has two types of wireless and wired, the receiver is portable, mobile, small size, loud sound, easy to use.
Rod Bee can't turn it off because the switch is broken. Sound button damage can be repaired or replaced. Rhodes Bee is a digital wireless microphone, through the SERIESIII4GHz digital wireless transmission, 128-BIT encryption design, the use of linear distance up to 70 meters. Built-in coreFull directional condenser microphone, equipped with intelligent noise reduction chip, can bring high-quality radio effect.
Hello should be support charger power supply. You can use charging appliances should be able to play a role in charging. Ordinary dry batteries can not be used for a long time, if the use of dry batteries for a long time will be dangerous. Therefore, connecting the mains for a long time requires rechargeable batteries to be safe.
Lord's Bee on live one. According to the query of relevant public information: Rod wireless bees often encounter insufficient mobile phone power when live broadcasting, because the charging port is occupied and cannot be charged, and now there isLive one, that problem is solved. It can not only charge, but also realize real-time monitoring.
The solution to the unclear sound is as follows: To distinguish the receiving end and the transmitting end of the small bee: on the back of the small bee, you can see the English identification, where the receiver is the receiving end and the transmitter is the transmitting end. The next step is: Connect cables. At the launch end of the bee, find the microphone sign and connect the mic to the launch end of the bee.
The blue light is fully charged. The Rohde wireless microphone takes up to four hours to fully chargeThis is directly related to the battery capacity of the wireless microphone, which uses the wireless signal to connect the self-installed fixed battery as the battery power supply, so its battery capacity can support it for a long time. It takes four hours to recharge once you plug in the charger.
Shuobide (300322) is a professional manufacturer of wireless communication terminal antennas, the main business is the research and development, production and sales of wireless communication terminal antennas. The company is committed toMobile phone, laptop, AP, mobile TV terminal, satellite positioning terminal and other wireless communication terminal manufacturers provide a package of antenna solutions. Already layout wireless charging, once the rise, the company or the first to benefit.
Shenzhen Fangxin Technology Co., Ltd. is one of the members of the Wireless Charging Alliance (WPC), the earliest domestic high-tech based, set product development, production and sales as one engaged in wireless charging technology field system solutions provider. Fangxin Technology is the only finished product manufacturer using its own hardware and software technology to pass QI certification.
Shubide (300322) : A-share is the first communication antenna leader to enter wireless charging. The company is the domestic communication terminal antenna leading enterprises. Shuobide is a professional manufacturer of wireless communication terminal antennas, the main business is the development, production and sales of wireless communication terminal antennas. The company is committed to providing a package of antenna solutions for mobile phones, laptop computers, AP, mobile TV terminals, satellite positioning terminals and other wireless communication terminal manufacturers.
This article will introduce four leading wireless charging concept stocks and discuss their development prospects and market impact. Company A: A leading provider of wireless charging technologyA is a company focused on the development and supply of wireless charging technology. Through continuous innovation, the company has introduced a series of efficient and safe wireless charging products to meet the charging needs of various devices in the market.
Tiantong (600330) : is a leading enterprise in soft magnetic industry, main magnetic ferrite materials, products used in LED drive power, wireless charging, NFC, new energy and new inductors; With soft magnetic materials as the entry point, it is deployed in the field of wireless charging, including wireless charging transmitting and receiving coils.
Xinwei Communication (300136) : In recent years, the company's product lineHas expanded from the RF series to NFC/ wireless charging, MIM powder metallurgy, audio, testing tools and other categories. At present, NFC wireless charging products have begun to supply Samsung, and the company has the best quality and most complete solutions in this field. Shunluo Electronics (002138) : Wireless charging is one of the most important and expected fastest growing product lines in the future. The company is the domestic inductor leader.
High appearance level, long endurance, a powerful walkie-talkie at 100 yuan price: With the popularity of walkie-talkie, whether it is a self-driving tour enthusiasts, security guards or radio enthusiasts, they regard it as an important tool for daily communication. Although the network is developed and wechat is convenient, the unique advantages of the walkie-talkie make it still indispensable in many occasions. In particular, the pole bee small language walkie-talkie A208, at the price of 129 yuan, provides an excellent cost performance.
If you need to use the intercom for a whole day's office, it must have certain requirements for its battery life, so that you canSay goodbye to the plight of a full day. It is equipped with Micro-USB charging interface, combined with low-power design of hardware and software, which makes it have 165 hours of standby time and more than 10 hours of use time, fully meeting the daily communication needs of users.
As a young Xiaomi ecological chain company, bee talk Technology has laid the outdoor life brand attributes of bee talk technology from the first MI Mi walkie-talkie product planning to the successful listing. The launch of the Pole Bee brand in 2018 marks the creation of the unique beauty of science and technology in the use of Xiaomi's minimalist intelligent hardware styleAppeal, forging moving outdoor life, coldplay peripheral products.
Does the subject want to ask "the reason why the small bee charging light is not bright"? Poor contact. Check whether the bee has been showing a red light when charging, if it is, it means that the amplifier is not relevant, to turn off later charging; If the light is off, the charger is broken and needs to be replaced or repaired.
may be out of power is generally charged for 8-10 hours can not exceed 10 hours. How longA charge depends on his workload. The volume is one punch a day the workload is not two or three days a punch. About four hours after full blast. And don't use up all the power in the battery. So easy to lose the battery, when to recharge it? A sudden drop in tone at the same volume is a sign of low power. Charge it in time.
The mobile power supply is broken. According to the query of the relevant information of the charging treasure, the power light may not be bright, which may be the mobile power supply is broken, and the mobile power booster module is damaged, which needs to be sent for repair.
W_F The small bee loudspeaker cannot be charged Solution The cause of the faultCause: The charger is faulty. The battery is damaged. Loose interfaces cause poor contact. Solution: Check whether the red light is always displayed when charging, if it is, it means that the amplifier is not concerned, and it should be turned off after charging. If the light is off, it may be that the charger is broken and needs to be replaced or repaired.
The causes are as follows: If the connection indicator is off, it indicates that a router is faulty between the network adapter and the HUB or switch. If the signal light is off, there should be no signal for transmission. The connection between the lines is normal. Use the replacement method to replace the network cable connecting the computer with another oneTry it on a computer or check with a tester.
If the power connection is normal, but the three indicators are still not on, there may be a fault in the charger itself. In this case, you can try to plug the charger plug into another power outlet to test to determine whether it is a socket problem. If the other sockets work properly, then it is likely that the charger is faulty. At this time, you should contact professional maintenance personnel or after-sales service center for repair or replacement.