The sliding bracket should be flexible, and there should be 3 to 5 supports and hangers fixed on the building structure on both sides of the sliding bracket and chute, which should not affect the safety of the structure:
The distance between the supports and hangers of the horizontal installation of the steel pipe should not be greater than the following table:
Nominal diameter steel pipe support maximum clearance\/maximum spacing\/mm1520253240507080100125150200250 stents
m Insulation pipe 22.52.52.5334 Vertical or horizontal bracket spacing of plastic pipes and composite pipes of heating, water supply and hot water supply systems shall comply with the following table, the pipe bracket made of metal, should be lined with non-metal pad or sleeve between the pipe and the bracket: Plastic pipe and pipe pipe support spacing of the maximum clearance diameter\/mm121416182025324050637590110 0.50.60.70.80.91.01.11.31.61.82.02.22 stand pipe.
4 horizontal tube cold water pipe 0.20.20.250.30.30.350.40.50.60.70.8 0.40.40.50.50.60.70.80.91.01.11.21.351.55 hose
The answer to this question depends on the specific sliding bracket, because different models of sliding brackets will vary in spacing.
However, in general, the distance between the sliding brackets is generally between 1-2 meters.
This is because too much spacing may make the weight of the bracket is not balanced, resulting in unstable installation, too small spacing may make the friction between the brackets is too large, resulting in poor sliding, so it is necessary to choose the appropriate spacing in this range.
If you need to know the spacing information of a sliding bracket, you can check its product parameters or consult the relevant manufacturer.