Punode charging pile is a device used to charge electric vehicles. The following is a brief description of the Punode charging pile:
1. Installation: Install the Punode charging pile in a fixed position to ensure that it is firm and stable. It can be installed on the wall or on the ground, or it can be installed using a special bracket.
2. Connect the power supply: Connect the Punode charging pile to the power grid. Ensure power supply is stable and complies with local safety standards and regulations. 3. Connect the electric vehicle: Using the appropriate electric vehicle charging cable, connect the charging interface of the vehicle to the corresponding socket on the Pounod charging pile.
4. Charging mode selection: Punode charging pile usually supports different charging modes, such as fast charging and slow charging. Choose the charging mode that suits your needs and follow the instructions to set it up.
5. Start charging: After confirming that the charging mode is set correctly, press the charging button to start charging. The charging pile will display the current charging state, including charging current, voltage and remaining charging time.
6. Charging completion: When the charging is completed, the Punod charging pile will sound a prompt and display the information of charging completion. Disconnect the vehicle from the charging pile so that the vehicle can operate normally.
7. Charging record and payment: Punode charging pile usually records the relevant information of each charge, including charging time, power and cost. Some charging piles also support online payment functions to facilitate users to pay for charging.
8. Safety precautions: When using the Pounod charging pile, make sure to follow the following safety precautions:
- Do not touch the charging plug or the metal part of the charging pile while charging to prevent electric shock.
- Do not install charging piles in flammable or humid areas to prevent fire or short circuit.
- During the charging process, keep the ventilation around the charging pile well to avoid overheating.
- If the charging pile is found to have abnormal conditions (such as smoke, heat, etc.), stop using it immediately and contact professionals for maintenance.
This is a brief description of the Pounod charging pile, the specific operation and details should be operated according to the actual product instructions. When using charging piles, be sure to operate in accordance with relevant safety regulations and standards to ensure safe and smooth charging.
Punode charging pile is a device used to charge electric vehicles. The following is the instruction manual of Pounod charging pile:
1. Equipment appearance and component description:
- The charging pile shell is made of fireproof material, with waterproof, dustproof and anti-corrosion characteristics.
- The charging pile is equipped with a display screen to display the current charging status and power level.
- The charging pile is provided with a socket for inserting the charging plug of the electric vehicle.
- A charging start\/stop button is also provided on the charging pile to start or stop the charging process. 2. Installation and use steps:
- Insert the charging pile into the power socket and ensure that the power supply works properly.
- Check whether the plug of the charging pile and the electric vehicle is compatible, and insert the plug if it is compatible.
- Press the charging start stop button to start the charging process.
- During the charging process, you can check the charging status and power through the information on the display.
- After charging, you can press the charging start stop button to stop charging, and then pull out the charging plug. 3. Precautions:
- Before using the charging pile, ensure that its shell and wiring are normal to avoid electric shock or other safety accidents.
- During the charging process, ensure that the socket and plug are securely connected to avoid abnormal current or other faults.
- During the charging process, avoid contact with the charging plug and wire to avoid electric shock or other hazards.
- During the charging process, if an abnormal situation occurs, please stop charging immediately and contact the maintenance personnel. 4. Maintenance and maintenance:
- Check the shell, wiring and socket of the charging pile regularly. If you find damage or loose problems, please repair or replace them in time.
- Clean the shell of the charging pile regularly to ensure its normal operation.
Please read the above instructions carefully before using the charging pile and follow the instructions. If you have any other questions, please consult the manufacturer or professional technician of the charging pile.
Punode charging pile is a device used to charge electric vehicles. The charging pile can be installed indoors or outdoors to provide convenient charging services. The following is the instruction manual of Pounod charging pile:
1. Installation:
a. When selecting the installation location, please ensure that the charging pile is close to the parking location of the electric vehicle for easy connection.
b. Use the installation tools provided to secure the charging pile to the ground or wall (depending on the installation location).
c. Connect the charging pile to the power supply and ensure that the power supply works properly.
2. Charging connection:
a. Ensure that the electric vehicle has stopped and turned off the power.
b. Insert the charging plug of the charging pile into the charging port of the electric vehicle.
c. Ensure that the plug is securely connected and not loose or broken.
3. Charging process:
a. Open the power switch of the charging pile.
b. On the control panel of the charging pile, select the appropriate charging mode and parameters, such as charging time or current.
c. If necessary, you can set the automatic stop function at the end of charging.
d. Press the \"Start Charging\" button to start charging the electric vehicle.
a. When the charging is complete, the charging pile will automatically stop charging and display a prompt indicating that the charging is complete.
b. Remove the charging plug and ensure that the plug is separate from the charging port of the vehicle.
c. Disconnect the charging pile and turn off the power switch.
d. Check the charging status and charging time.
e. Put away the charging plug and store it properly.
Please note that these are general operating instructions and specific charging pile models may vary. Please read and follow the product instructions and safety guidelines carefully before using the Prude charging points.