It is best to clean up, otherwise the wiring short circuit is also a problem, please don't panic after the phone is flooded. The situation is divided into three types: first, in the case of electricity into the water; (2) Fall into non-corrosive liquid in the case of power failure; (3) Fall into non-clean water when energized, or fall into corrosive liquid or viscous liquid or other partially clean liquid whether energized or not. The first two cases have a good chance of survival and may have no sequelae, the latter is a matter of luck. Of course, if you're unlucky, the PPC will break in your pocket. The biggest problem after PPC water is how to deal with it. First of all, for the first or second cases, do not think that the machine is dead. Don't try to disassemble it because it's already flooded. The following are some suggestions for various situations: First, in the case of electricity into the water, this situation generally does not need to disassemble the machine. 1. Power off as soon as possible. 2, hard to shake dry (depending on the situation, if the phone picked up immediately after falling into the water can be considered not to shake dry), but do not get rid of the machine, the idea is to shake out the water in the screen. If there are any droplets left on the screen, there will be traces when it dries. 3, put the lamp, spotlights and other light heat sources to let the water slowly disperse. The process takes more than six hours. Do not rush to use a strong heat source such as a hair dryer 4, if there is something left on the screen and it is very serious, do not press the first point of the third treatment, because the electronic circuit after this treatment can work normally, but the screen may be ugly. It can be sent to the nearest maintenance department for processing or disassemble the machine by yourself. If your love machine accidentally fell into the water treatment methods: 1, do not turn on the water, charging, because the iphone is a built-in battery can not be taken down, the water motherboard will short circuit, if the boot or charge will burn the motherboard, causing irreparable consequences. 2, into the first hard shake the mobile phone as much as possible to throw out more water, and then use the wind to dry the water. Wind up to maximum temperature on medium. 3, find a professional repair center for iphone repair as soon as possible.
Rechargeable,
Before charging, put a little water on the charging port of the iPhone 6S and wipe it clean with a napkin. Then normal charging should be no problem. Generally, it is cleaned and then flushed, otherwise it will be dangerous and may cause short circuit. Ah, the Apple six is not waterproof.
Starting with the Apple 7, the charging port is waterproof. In this way, it is more convenient to use, and he is not afraid of worrying about water