The steps to charge the T98 Bluetooth speaker are as follows:
< br >
1. Connect the speaker and power adapter (or a device such as a computer) with a Micro USB charging cable
< br >
2. Insert the power adapter into the power supply (or turn on the computer and other devices). You can see that the power indicator of the speaker is on, indicating that it is being charged.
< br >
3. Wait until the speaker power indicator turns green to indicate full.
< br >
considerations
< br >
1. In the first use, it is recommended that the charging time is at least 3 hours.
< br >
2. Ensure that the charging cable and port are correctly connected during charging to avoid failure to charge or damage caused by reverse or loose insertion.
< br >
3. When charging, ensure that the output voltage and current of the power adapter meet requirements to avoid device damage or security risks caused by overcurrent or overvoltage.
< br >
4. When the speaker power is less than 20%, it is recommended to charge in time to avoid affecting the service life of the speaker.
t98 Bluetooth speakers are mostly portable Bluetooth speakers, which have rechargeable batteries, charging voltage is 5 volts charger, there is a USB charging interface on the speaker, you can use the same model of USB plug, plug into the charging interface for charging
1. Use USB cable to connect the power supply or computer to charge the T98 Bluetooth speaker;
2, because the T98 Bluetooth speaker built-in rechargeable battery, and through the USB cable can be the power supply or computer power into the power of the speaker, so as to achieve the charging function;
3, it should be noted that when the power of the T98 Bluetooth speaker is low, it should be charged in time, and avoid using the speaker to play music when charging, so as not to affect the charging effect and battery life.
Charging with a Micro USB cable
Because the charging port of the T98 Bluetooth speaker is a Micro USB interface, you need to use a Micro USB charging cable to charge.
After inserting the charging cable into the Micro USB charging port and power socket of the speaker, you can start charging. When charging, the indicator light will turn red, and when it is full, the indicator will turn blue.
In addition, when using a charging bank to charge a speaker, it is recommended to use a charging bank with a charging current of not less than 1A for better charging effect.
Charge after discharge.
Generally, the first charging of Bluetooth audio takes 2-3 hours. A fully charged Bluetooth speaker can be used for 9-10 hours.
When charging, it is best to shut down and charge, one is good for the battery of the Bluetooth speaker, and the other is faster to charge.
Generally speaking, the red light means that it is charging, and the green light means that it is full. If it is always a red light (charging for more than 3-5 hours), it indicates that there is a problem with the charging circuit of your speaker, or it does not have the full charge stop function. If the charge can be used normally for 1 hour, it is best not to timeout.
If the use of lithium battery, we must be clear that lithium battery is almost no memory effect, can be used with the charge, but the first few times may not reach the best capacity, generally normal charge and discharge 3 times after normal.
Generally, when purchasing Bluetooth speakers, accessories have their own charging cable, Bluetooth speakers have charging USB interface, the USB port of the charging cable is inserted into the charger, and the other end is inserted into the interface on the Bluetooth speaker.