It is not recommended that you remove the wireless charger of the Apple 14 yourself. Because this requires professional skills and tools, improper operation may cause equipment damage, battery leakage, electric shock and other safety problems. In addition, removing the wireless charger may also affect its warranty and return services.
If you encounter problems with wireless charging, it is recommended that you try the following solutions first:
1. Make sure that the distance between the charging base and the smart device does not exceed 3 cm;
2. Replace the position where the center of the charging coil is aligned with the smart device, so that the two are adsorbed together as far as possible;
3. Ensure that the surface of the charging base and smart devices is clean, free of dust and foreign matter, and cleaning helps to improve the charging effect;
4. Check whether there are metal or magnetic items placed between the charger and the smart device, and if so, it needs to be removed.
If these solutions do not solve the problem, it is recommended that you go to Apple authorized repair point for testing and repair to ensure safety and effectiveness.
First of all, you need to use a professional opener to slowly peel off the back of the Apple 14 wireless charger.
Next, remove the four screws with the appropriate screwdriver and take care to store the screws in a safe place.
Then, carefully remove the back plate of the wireless charger and unplug the battery connector.
Then, you need to forcibly insert and remove the sticky tape to remove the wireless charging chip and coil.
Finally, carefully remove the circuit board of the wireless charger for inspection and repair. Note that care needs to be taken during disassembly to avoid damaging components and batteries to ensure safety.