1. Clear conclusion: If the apple 12 stand is degummed, it can be repaired by cleaning the degummed part, pouring an appropriate amount of UV glue, and then pressurizing adhesion. This repair method can better solve the problem of Apple 12 stand degumming.
2. Explain the reason: the reason for the degumming of the apple 12 bracket may be caused by the influence of too long time or the temperature and humidity of the use environment. These factors cause the UV glue between the bracket and the back shell of the phone to be damaged, making the bracket free from the back shell. Therefore, re-using UV glue for bonding maintenance is a more effective method.
3. Extension: When repairing Apple 12 stand degumming, you need to pay attention to the following points. First, clean the back shell of the degummed part to ensure that there are no impurities such as dust and oil stains. Secondly, pour an appropriate amount of UV glue, not too much or too little. Third, use a clamp with the right amount of pressure to tightly bond the bracket and the back shell of the phone to ensure that the glue can be fully coated on the adhesive surface. The repaired bracket needs to be dried, making sure to allow enough time for the glue to dry thoroughly and set.
4. Specific steps:
(1) Prepare UV glue and related tools.
(2) Clean the back shell of the degumming part and ensure that there are no impurities such as dust and oil stains.
(3) Pour an appropriate amount of UV glue on the degumming part and ensure that it is evenly coated.
(4) Use a fixture with appropriate pressure to tightly bond the bracket and the back shell of the phone.
(5) The repaired stent needs to be dried, and ensure that there is enough time for the glue to dry and fix thoroughly.
Repair mobile phone stands have a special screen glue :B-7000 glue (do not use 502,502 glue after really never separate). After gluing, the next time you want to remove it, just blow the heat to remove the loose glue without leaving any trace. For such a loose screen problem, squeeze a little glue to the edge of the frame and then close the screen.