Iron plate punching needs to use a punch, to punch 10 mm thick iron plate aperture of 26 mm, need to select the corresponding punch. First of all, it is necessary to consider whether the hydraulic power and pressure of the punch can meet the requirements of punching, and secondly, it is necessary to choose the appropriate die and punch.
The size, shape and material of the die and punch should match the thickness of the iron plate and the size of the punch to ensure the quality and accuracy of the punch. When selecting presses and molds, factors such as production efficiency, cost and reliability should also be considered.
Combining all these factors, the choice of the right punch and die can ensure high quality punching results and improve production efficiency.
To punch a hole of 10 mm thick iron plate and 26 mm diameter, a press with a tonnage of more than 30 tons is required. The exact size of the punch depends on the size of the hole, the strength of the iron plate, the accuracy and configuration of the punch. In general, the size of the hole is proportional to the tonnage of the punch, so the size of the punch can be increased by increasing the tonnage of the punch. It should be noted that too high a press tonnage may cause deformation or damage to the iron plate, so it is necessary to choose the appropriate press tonnage according to the actual situation.