中文English
Depending on the Huawei home camera model, some may need to use the APP on the mobile phone for operation, while others need to log in to the camera management page on the PC for o...

Huawei home camera how to replace wifi?

Depending on the Huawei home camera model, some may need to use the APP on the mobile phone for operation, while others need to log in to the camera management page on the PC for operation. The following are the general steps:

< br >

1. Open the Huawei Home Camera APP or open the camera management page on your PC.

< br >

2. Find the \"Settings\" option and select \"WiFi Settings\".

< br >

3. On the WiFi Settings page, select the \"Modify\" button next to \"WiFi Name\".

< br >

4. Then follow the prompts, enter the new WiFi name and password, and connect to the new WiFi.

< br >

Please note that when replacing the WiFi, first make sure that the new WiFi network is connected properly, and the WiFi network has no password errors to avoid connection failure due to improper operation. If the connection fails, you can manually add the WiFi SSID (WiFi name) and password to reconnect.

< br >

Some Huawei home cameras may also support wired connections, which can be connected to the router through a network cable, which can also connect the camera to the network.


1. Restore factory Settings. Use a toothpick or a sharp object to poke a small hole in the back of the camera until you hear that the reset is successful.

< br >

2. Reset the wifi information.

< br >

First of all, start the mobile phone client, the information of setting wifi will appear, and then select the name of the wifi to be connected according to the program setting, then click to enter the password, and save it after successful connection.


Huawei home camera replacement wifi method:

< br >

1. Press and hold the camera reset button for about 5 seconds until the indicator blinks yellow and green.

< br >

2. Connect your mobile phone to the new wifi and open the Huawei Smart Home APP.

< br >

3. Add the device in the APP, select the camera, and enter the wifi name and password as prompted.

< br >

4. Connect the camera to your home network by scanning the QR code on the back of the device.

< br >

5. When the indicator turns steady green, the connection is successful. If you can't connect for a long time, try restarting your device or checking that your home network Settings are correct.