one
First, open the phone Settings, find the option to enable WLAN, and turn on this option;
< br \/ >
< br \/ >
< br \/ >
two
When you open it, you'll see the wireless network you're connected to. Scroll down, find \"Advanced Settings,\" and open \"Advanced Settings.\"
< br \/ >
< br \/ >
< br \/ >
three
After opening, you will see a lot of information, such as the more important IP address and MAC address, select the option we need to set \"WLAN band\" and open;
< br \/ >
< br \/ >
< br \/ >
four
There are two kinds of WIFI bands transmitted by our router, one is 2.4G, and the other is 5G, but 5G has high distance requirements and poor penetration, so we choose 2.4G, do not check automatic, and the phenomenon of network interruption will occur during the process of automatic switching;
< br \/ >
< br \/ >
< br \/ >
five
Another way is to prevent network disconnection at an important time, is to open the \"WLAN Settings\
wifi automatic disconnection may be due to low signal band penetration caused by disconnection, the solution is as follows.
1. First unlock the Mi 10 phone and click on miui12 to open [Settings].
< p >
2. Open the phone Settings interface, find [WLAN], and click Open.
< p >
3. Next, find and click on [Advanced Settings] in the wireless network.
< p >
4. In this way, you can see [WLAN band] in advanced Settings, click to open this option.
< p >
5, finally, there are three options in the WLAN band selection, the general default is automatic, select [only use 2.4Ghz band], so that strengthening the penetration of the wireless network will alleviate the situation of dropped calls.
< p >
Often drop the line first consider the cat problem, it is recommended to remove the route, directly even the cat to try to see that it can not be dropped.
2 If you can't drop the cat directly, you should consider the problem of routing. This situation should be a matter of the routing hardware, and has little to do with the routing Settings.
3 The broadband itself is unstable, or there is strong signal interference nearby, which is the first thing to consider after excluding routing
First, you need to make sure that your network is stable and second, if it's not, you need to repair it