The three lines of the fan are the fire line (L), the neutral line (N) and the control line (C). A capacitor is an electronic component used for starting and working.
< br >
The wiring method will vary according to the specific fan and capacitor model and the manufacturer's instructions, so here is a common wiring method:
< br >
1. Connect the fan's firewire (L) to a terminal of the capacitor.
2. Connect the neutral wire (N) of the fan to the other terminal of the capacitor.
3. Connect the control wire (C) of the fan to the third terminal of the capacitor.
4. On this basis, it is also necessary to connect the live line (L) and the neutral line (N) to the corresponding position of the power supply point.
< br >
Please note that the above is only a common demonstration method, the specific wiring method should also refer to the fan and capacitor instructions or instructions at the time of purchase. In addition, to ensure safety, make sure to disconnect the power supply before wiring, and if you are not familiar with the circuit and electrical appliances, it is recommended to consult a professional electrician.
The three wires of a fan are the live wire, the neutral wire and the ground wire.
Normally, the starting capacitor is connected to the starting line of the fan, and the running capacitor is also connected to the motor line.
It should be noted that the installation and wiring of electrical equipment requires a certain electrical knowledge and skills, in order to avoid electrical accidents, it is recommended to ask a professional or electrician to operate or consult.
1. The three lines separated by the fan capacitor are the yellow capacitor rotor control line to control the fan rotation, the red power line, and the blue neutral line.
2. Connect the fan's blue wire to the capacitor's rotor control wire, and connect the capacitor's power cord with the black wire.
3, after the connection, the remaining red line is connected to the power supply, that is, the 220V fire line, and then the remaining two lines are connected to the neutral line of the power supply with one of the lines, so that a loop can be formed, and the capacitor plays the role of starting the capacitor.
one
First of all, when we connect the electric fan capacitor, we must find three wires, one is the starting line, one is the running line, and one is the capacitor line. After we find these three wires, the capacitor line and the starting line are connected.
two
When connecting, place the collinear and operating lines in the middle, and then find the neutral line of the power supply.
three
After we connect a capacitor line to the neutral line, the fire line of the power supply is connected to the middle line of the governor, that is, the line exposed by the governor is connected to the operating line of the ceiling fan.
four
Then we connect the wire to the capacitor, and the capacitor leakage line is connected to the starting line of the electric fan.
When you put it back in, the fan spins, the wind doesn't slow down, the steering is normal, the wiring is correct. A little shaking is normal. The main thing is how stable you are when you hang the fan. Ceiling fans 3 wire connection is: black line very lead to connect power for the public, the other two wires connect capacitor, capacitor sides of lead to connect power, the two lead wire connected to the power supply, if the fan to badly auxiliary long dian gan pride imitation temple east splashed wet, for sure will pick up the thread of capacitor break, received on the other side of the capacitor.
Usually, the fan red is the live wire, or the motor working winding lead, should be connected to the power supply live wire, the yellow wire is the starting winding lead, the capacitor should be connected to the red line and the yellow line, the black line should be connected to the neutral line, do not connect the capacitor to the two lines directly connected to the power line. The connection method is as follows: Connect the neutral line of the electric fan directly to the power socket of the fan