Smith vertical water heater control panel instructions are as follows:
< br >
Find the water heater's control panel, which is usually located on the front or side of the water heater.
There may be temperature adjustment buttons on the control panel, usually represented by \"\" and\" - \"symbols. By pressing these buttons, you can gradually adjust the temperature of the water heater, usually by 1 ° C at a time. After adjusting to your desired temperature, you can release the button. The temperature range of Smith water heater is usually between 30 ° C -75 ° C, and the appropriate temperature should be selected according to demand.
If there is no display on the control panel, it may be because there is no power supply or the cable is not plugged properly and needs to be plugged back in.
If only the time is displayed on the panel, then the host is in standby.
When the time and temperature are displayed on the panel, the host is in a delayed (three minutes) startup state.
If there is time, temperature on the panel, and there are 4 black circles on the bottom right, then the host is heating up and running.
If you find that the water heater cannot adjust the temperature through the control panel, you may need to replace the water heater chip. This involves removing the housing of the water heater, finding the water heater chip and removing it with a screwdriver, then replacing it with a new chip. Please note that replacing the chip requires a certain amount of electrical knowledge and skill, if you are unsure, it is recommended to ask a professional to replace it.
If you feel that the water temperature is not high enough or too high, you can try to adjust the water outlet of the water heater. The water outlet is usually located on the front or side of the water heater and can be adjusted with a wrench or pliers to change the temperature of the water outlet. Careful handling is required to avoid damaging the water heater.
< br >
The above information is for reference only, the specific operation may vary depending on the water heater model and the actual situation. It is recommended to read the water heater instruction manual carefully before use, and follow the instructions in the instruction manual. If you encounter problems or difficulties, it is recommended to contact Smith water heater after-sales service or professional maintenance personnel for consultation and repair.
The control panel of the Smith vertical water heater mainly includes the switch button, the temperature regulator and the running status indicator. Press the switch button to start or turn off the water heater, and use the temperature regulator to set the temperature, which is generally 60 ° C by default. When the water heater starts heating work, the operating status indicator light will light up; After the heating is complete, the indicator light will be extinguished. This control panel is very easy to understand and easy to use.