1. Remove paper jam from the feed tray area If the edge of the paper can be seen in the feed area, slowly pull the paper down out of the printer. If you can't see the paper, look for it in the top area. If you cannot move the paper easily, do not force it. If the paper is attached to the paper plate, try to remove it through the upper part of the plate or from the top cover area.
< br >
2. Remove the cardboard from the top cover area, open the top cover and remove the print toner cartridge. In order to prevent damage to the printed flour box, do not expose it to sunlight for more than a few minutes; Use the green handle to extract the paper and check the cover plate; Slowly pull the paper out of the printer. Close the cover of the paper inspection port, reinstall the print flour box, and close the top cover.
< br >
3, Remove paper from the output area If the paper is stuck in the top output area, but most of the paper is still left in the printer, it is best to remove the paper through the rear stop door. Push the two gray bolt locks to release the rear stop door; Push down on the green paper to release the handle; Grab the sides of the paper and slowly pull the paper out of the printer. Note: If it is difficult to remove the paper, try opening the top cover and removing the print toner cartridge to reduce the pressure on the paper.