Data cables, chargers, sockets, connectors, jacks, and the internal battery itself may have problems, which can be carefully checked.
1, it is recommended that you use the standard charger and charging cable to charge.
2, if your mobile phone is not used for a long time, or low power off after the phone is not charged in time, there may be a case of overdischarge of the battery, it is recommended that you connect the charger, charge for more than 30 minutes to see whether the phone has a reaction.
3, if your mobile phone can be turned on, please confirm whether there is poor contact or charging equipment damage
(1) Please check the interface between the charging cable and the mobile phone, and whether the charging cable is fully inserted;
(2) Please check whether the data cable, charger and socket are in poor contact, it is recommended to reinsert;
(3) Please check whether the joint and jack are clean, if you find dust, it is recommended to clean it with a brush, and then re-charge to confirm;
(4) Please check whether the data cable, charger and socket are damaged or abnormal, if damaged, please replace.
4. It is recommended that you replace other chargers that can charge normally and try to charge. If the charger can be charged normally after replacement, it may be the charger and data cable fault, if it can not be charged, it may be the phone itself. It is recommended to bring the mobile phone, charger and data cable to the nearby customer service center for repair.
Millet mobile phone connected to the charger on the cause of power failure and solutions:
1. The most common cause of Xiaomi mobile phone charging is poor contact. When you encounter Xiaomi mobile phone charging, try to reinsert the connection between the charger and the phone
2, in addition to reconnect still can not charge, please change another mobile phone charger to try, you can also try to connect the millet phone to the computer to try, if the problem is solved, then it should be the charger problem, if not solved, then the problem may be in the millet, it is recommended to contact the millet official customer service or after-sales
3, in addition, if the millet phone supports battery removal, then you may wish to try to use the charger or universal charger to fill the battery once
4. If the above methods do not work, you can take your mobile phone charger, data cable, battery and mobile phone to a nearby repair point for testing
< br >
Power failure cause:
1. The charging control circuit is faulty 2, the charger is faulty 3, the interface contact is poor 4, the battery performance is close to failure