中文English
无线充镍片ichaiyang 2024-05-13 3:30 65
Sodium hydroxide can be used to clean stainless steel, but it is necessary to pay attention to the method and concentration used.Sodium hydroxide is an alkaline substance that can...

Can sodium hydroxide clean stainless steel?

Sodium hydroxide can be used to clean stainless steel, but it is necessary to pay attention to the method and concentration used.

< br >

Sodium hydroxide is an alkaline substance that can remove some dirt and grease from the surface of stainless steel. When cleaning stainless steel with sodium hydroxide, you can dissolve a small amount of sodium hydroxide in warm water, and then use a soft cloth or sponge dipped in the solution to gently wipe the stainless steel surface. This can help remove some stubborn stains and oils, so that the surface of the stainless steel to restore luster.

< br >

However, it should be noted that sodium hydroxide is a strong alkaline substance, and it is necessary to protect the skin and eyes when using it to avoid direct contact. In addition, when using sodium hydroxide to clean stainless steel, attention should be paid to diluting the appropriate concentration, and it should not be too concentrated, so as not to cause corrosion or damage to stainless steel. After cleaning, it should also be thoroughly washed with clean water, and immediately dry the surface moisture to prevent water stains from remaining and causing rust. It is best to test in an inconspicuous place before use to ensure that it does not cause adverse side effects. If there are large areas or stubborn stains, it is recommended to ask for professional help.


Can wash stainless steel.

< br >

Caustic soda, also known as caustic soda, sodium hydroxide. It is a strong alkaline detergent with strong deterring power, and it is commonly used in life to clean oil stains and stains that are difficult to remove. The surface of the stainless steel plate is plated with chromium, nickel, zinc and other metal elements, which can increase the toughness of the steel and have strong corrosion resistance. Under ordinary conditions, these metal elements in caustic soda and stainless steel do not react chemically, and they cannot corrode these stainless steel products.


Stainless steel plates can be cleaned with sodium hydroxide. Sodium hydroxide, is caustic soda, add caustic soda to water, preferably warm water, the concentration should be low, take good latex gloves, otherwise it will hurt the hand skin, caustic soda to oil, low concentration cleaning, 304 stainless steel will not corrode, 304 is high chrome-nickel stainless steel, acid and alkali resistance, clean the plate to wash in clean water and then cool dry.


Stainless steel is an alloy that does not corrode easily. In daily use, if you need to clean stainless steel products, you can clean them by clean water, neutral detergent or acetic acid. And for some particularly stubborn stains, you can consider using sodium hydroxide to clean.


Sodium hydroxide (NaOH) is a strong base that is commonly used for cleaning and removing grease, dirt, etc. Although sodium hydroxide can be used to clean stainless steel, the following points need to be noted:

Dilute use: Sodium hydroxide should be used after diluting at an appropriate concentration to avoid damage to the stainless steel surface. It is recommended to dilute sodium hydroxide in water and use it in the specified proportion.

Adequate washing: After the cleaning process, the stainless steel surface should be fully washed to ensure that the sodium hydroxide is completely removed to prevent possible corrosion or damage.

Protection: When using sodium hydroxide to clean stainless steel, it is recommended to wear protective gloves and glasses to avoid damage caused by alkaline solution contact with skin or eyes.

Aluminum and galvanized materials Note: When stainless steel comes into contact with aluminum and galvanized materials, it is especially necessary to carefully clean with sodium hydroxide, because alkaline solutions may cause corrosion to these materials.


Of course you can. If there is oil on the surface of stainless steel, you can use sodium hydroxide solution to remove ah, this process is also called alkali washing. In order to strengthen the effect of oil removal, the general alkali water is heated to a certain temperature, and the cleaning effect is better.