1. Pause the machine
Problem description: Press the start button to start, the machine runs for a few seconds on the pause, the fan, brush and wheel do not turn, to restart three times, three times after the restart of the machine on the pause, the buzzer alarm.
Repair method:
If it is a rough felt ground, the resistance of the machine is too large, put the machine on the floor environment to try.
② Pull out the left and right wheels to start the machine to see if there is this bad phenomenon, if there is, there is a problem with the motherboard, need to replace the motherboard, if the wheel is pulled out, it is clear that the wheel is the problem, need to replace the wheel.
2, the remote control is not sensitive
Problem description: The buttons on the remote control, sometimes can be remote control sometimes can not be remote control.
Repair method:
① Check whether the voltage of the remote control battery is too low.
② The machine cannot be placed in front of the open charging base and virtual wall (it cannot be remote controlled within 3M in front of the separate charging base and virtual wall), please unplug the power of the charging base and turn off the virtual wall before remote control.
(3) Open the charging seat, let the machine switch to the form of running to find the charging seat, see if the machine can actively turn the circle when looking for the charging seat, can turn the circle to clarify is the problem of the remote control, if it can not turn the circle, it is explained that the machine accepts the head of the problem, replace the key plate.
3, the cleaning effect is not good suction smaller
Problem description: The dust suction is not clean when the machine is sweeping
Repair method: Check the dust box, dust inlet, dust box cover is too dirty or blocked, side sweep is normal. Whether the battery is dead.
4. Left\/right wheel does not turn
Description of the problem: After the machine is started, the left\/right wheel does not roll, and the main brush\/fan works normally.
Repair method:
① First check whether the left and right wheels have foreign bodies stuck, and whether the socket is loose.
② If only one wheel does not turn, then switch the left and right wheel socket to start the machine to see whether the machine or the previous wheel does not turn, if it is, the wheel that does not turn is broken, need to replace the wheel, if not, you need to replace the motherboard.
③ The machine starts to go sideways, the stop-and-go may be suspended after hitting the wall, the motherboard is broken, and the motherboard needs to be replaced.
< br >
How to repair 360 sweeping robot, its noise increases, suddenly stop working?
< br >
5. Increased noise
Problem description: The sound of the running machine suddenly becomes louder.
Repair method:
If the running machine suddenly becomes louder, investigate whether the machine has entered the form of clockwise fixed point cleaning, if it is into the form of fixed point, return to the normal phenomenon, after a period of time will actively recover.
② If the machine has a sharp sound in the form of active cleaning, please check whether the dust box is installed, and check whether the brush and the dust box are too dirty.
(3) If there is a severe abnormal sound, the machine is switched to the form of active charging to run the machine to investigate the abnormal sound, if there is an abnormal sound, it is the abnormal sound of the brush main tooth box, check whether the brush wheel is stuck, or it needs to replace the main tooth box; If there is no abnormal sound, it is the abnormal sound of the fan, check whether the fan is stuck with foreign matter, otherwise it is necessary to replace the fan.
6, the brush does not turn
Problem description: The main brush turns, the side brush does not turn; Main bristle brush and side