Electric pressure cooker exhaust valve removed cleaning method:
1. Remove the power plug before cleaning.
2. Wipe the pot body with a rag. Do not wash the pot body in water or spray it with water.
3. Remove the water collection box and clean it. Wipe the upper seat with a wet towel.
4. Clean the inside of the lid with water, including the sealing ring, pressure limiting valve, blocking cover, exhaust pipe, float valve, and then wipe it clean with a rag.
5. Clean the inner pan with a sponge or non-metal soft brush, then dry with a rag.
Cleaning of the seal ring: hold the support cover tightly and pull the nail upward. After cleaning, pull the support cover and align it with the middle support shaft and press it downward. After installation, check whether the gap between the sealing ring and the circumference of the lid is uniform and can be turned freely before use; Be careful not to install it upside down (draw your hand outward).
Float valve cleaning: gently move the float valve core up and down by hand, and rinse the food residue of the float seal ring with water.
< br >
First, pry this open with a flat-mouth screwdriver.
< br >
Second, the same method to pry open a mouth, with a rice spoon inserted in a circle, you can
< br >
Extended information:
< br >
When using a flat-mouth screwdriver to pry, pay attention not to too much force, after prying open generally two screws, and some three screws. The pressure vessel is a dangerous container, do not change the electronic components at will, if there is a problem, it is recommended that you do not change yourself, it is more secure to send after the dismantling process pay attention not to break the wire.