cleaning method
< br >
1. Remove the power plug before cleaning.
< br >
2. Wipe the pot body with a rag. Do not wash the pot body in water or spray it with water.
< br >
3. Remove the water collection box and clean it. Wipe the upper seat with a wet towel.
< br >
4. Clean the inside of the lid with water, including the sealing ring, pressure limiting valve, blocking cover, exhaust pipe, float valve, and then wipe it clean with a rag.
< br >
5. Clean the inner pan with a sponge or non-metal soft brush, then dry with a rag. Cleaning of the seal ring: hold the support cover tightly and pull the nail upward. After cleaning, pull the support cover and align it with the middle support shaft and press it downward. After installation, check whether the gap between the sealing ring and the circumference of the lid is uniform and can be turned freely before use; Be careful not to install it upside down (draw your hand outward). Float valve cleaning: gently move the float valve core up and down by hand, and rinse the food residue of the float valve seal ring with water. Cleaning of pressure limiting exhaust valve: lift the pressure limiting valve, clean it with water respectively, and then place the pressure limiting valve body on the pressure limiting valve seat.
< br >
one
First of all, remove the lid of the rice cooker with a good tool to use: Phillips screwdriver, flat-head screwdriver, self-tapping screws.
two
Let's pry open the handle of the rice cooker lid.
three
Next, open the lid of the rice cooker and remove the rubber with a self-tapping screw.
four
Next, remove a screw at the vent hole on the cover of the rice cooker
5, then remove the screws on the sealing ring
6, and then all the screws on the rice cooker panel can be removed