The inflatable sofa is relatively simple and can be roughly divided into the following four steps:
< br >
First, you need to unfold the sofa so that the skeleton takes on its original shape.
Then, find the air nozzle (also called the air intake) of the sofa, which is generally located at the bottom or side of the sofa.
Open the air intake, and then swing the sofa in the air so that the sofa has enough air.
When the sofa pocket is full of air, you need to close the air intake immediately and fasten the buckle to prevent air leakage.
< br >
After completing the above steps, the inflatable sofa is already full of air. It should be noted that the sofa must not be overinflated when inflating, otherwise it may affect the quality and life of the sofa. In addition, this inflatable sofa uses high-density and high-strength parachute anti-tear ultra-light nylon material, can withstand 200kg weight, and only 0.8kg after compression, very light, easy to carry. _
1 Inflatable sofa inflation method 2 inflatable sofa generally has two ways of inflating, one is to use an inflatable pump, the other is to inflate through the mouth. The use of an air pump can inflate the sofa to the required hardness more quickly, while mouth blowing requires a certain amount of time and effort.
3 Using an air pump to inflate the sofa can save time and effort, and the hardness of the inflation can be adjusted according to needs. The mouth blowing inflatable sofa needs to pay attention to control the strength of inflation, so as not to overinflate and cause rupture.
During the inflation process, the hardness can be checked by pressing or gently tapping the sofa to achieve a comfortable inflation state.
4 In addition, the inflatable sofa needs to ensure that there are no sharp objects or sharp corners before inflating, so as not to damage the sofa.
After the aeration is completed, the position and shape of the sofa can be adjusted as needed to enjoy a comfortable rest experience.
Inflatable sofas are usually equipped with an inflator pump or a manual inflator. First, open the inflator and insert the inflator into the inflator. Depending on the type of inflator, use a power source or manual operation to inflate. During the inflation process, it is necessary to pay attention to the pressure and elasticity of the sofa to avoid damage caused by over-inflation. When the sofa reaches the required degree of inflation, close the inflation port in time and pull out the inflator. Finally, check the sealing performance of the sofa to ensure that the inflation port has been completely closed to avoid air leakage.