For that matter, here are the steps to set up a 24-port TPLink router:
1. Connect the router: Use a network cable to connect the router's WAN port to the broadband modem's LAN port, and then use another network cable to connect the computer's network card to the router's LAN port.
2. Log in to the router: Enter the IP address of the router (192.168.0.1 by default) in the address box of the browser, and then enter the user name and password to log in to the management page of the router.
3. Configure the router: On the management page of the router, you can set the SSID and password of the router, select the wireless encryption mode, and set port mapping and DHCP.
4. Save the Settings: After the Settings are completed, click the \"Save\" or \"Apply\" button, and the router will restart and apply the new Settings.
5. Test connection: After setting, you can connect to the router's wireless network on your computer or mobile phone to test whether you can surf the Internet normally.
considerations
1. The default username and password for the router can be found in the user manual or at the bottom of the router.
2. The management interface of a router may vary depending on the router model, but the configuration process is the same.
3. When setting the router, pay attention to security, such as setting a strong password and enabling the firewall.
1. Open the browser, enter 192.168.1.1, and press Enter. 2. Enter the user name and password of tp-link. The initial user name and password are admin. Enter the router Settings page, click \"Next, select the Internet access mode\
3. Set Internet access parameters, and then proceed to the next step, set wireless parameters, you can set your own wireless user name and password here,SSID is the meaning of wireless network user name,PSK is the place to set wireless network password. This is how the 24-port tplink router is set up.
The main question is the switch, 24-port switch support blind plug. Plug and play