1, the rated power of the electric kettle is generally larger, the capacity of the power plug, socket, power cord should be selected appropriately, generally appropriate 10A specifications, if the rated power exceeds 2200W, larger specifications should be used, and these sockets should be used independently to ensure safety.
< br >
2, the plug of the electric kettle is usually with a grounding pole, should be connected to the socket with a grounding jack. When in use, the power plug should be fully inserted into the socket.
< br >
3, always keep the electric kettle's power plug, socket, power cord and automatic switching device dry and clean.
< br >
4, water should not exceed the highest water level, so as not to overflow the kettle when the liquid boils. Water should not be too little, otherwise it will soon dry, especially the siren type electric kettle, at least the water should be immersed in the heat pipe more than 20mm, otherwise the electric heat pipe is easy to come out of the water and burn out. In addition, it should be noted that do not first turn on the power supply and then fill the water, otherwise it is easy to burn the heater or cause dangerous accidents.
< br >
5, the use of electric kettle should be taken care of, to avoid dry burning. If no one takes care of, after the water is boiled, the whistle kettle of the infinite temperature device will always dry the water, and the electric kettle equipped with an automatic reset temperature controller will also dry the water due to repeated heating, and if the overtemperature protection function fails at this time, it will lead to a fire accident.
< br >
? 6, when using the electric kettle, be careful not to let the child touch the kettle body or touch the power cord, so as not to cause burns and other accidents.
< br >
? 7, just after boiling is still connected to the power of the electric kettle in the water or drink is easy to cause danger. In order to avoid boiling water burns, you should first unplug the plug, cut off the power supply and then use boiling water to ensure safety.
< br >
8, when cleaning, the automatic electric kettle can not be immersed in water or washed with water shower, so as to avoid damage to electrical insulation due to humidity, causing failure and leakage.
< br >
? 9, the electric kettle has been used for a long time, and the surface of the electric heat pipe has scale. Scale not only affects the thermal efficiency, but also causes the heat in the tube to increase rapidly and damage the electric heat pipe. Therefore, it should be checked regularly and cleaned according to the instructions.
< br >
? 10, do not repair the electric kettle by yourself. In the process of use, if the appliance is damaged and can not work normally, do not disassemble the shell for repair, and should be sent to the repair shop or the product's production factory for repair.
1. Place the power base on a flat table;
2. Gently press the lid button, open the lid, and inject appropriate amount of water;
3. Close the lid, put the kettle on the power base, press the button at the bottom of the kettle, plug in the power, and turn on the boil