? 2, the plug of the electric kettle is usually with a grounding pole, should be connected to the socket with a grounding jack. When in use, the power plug should be fully inserted into the socket.
？
3, always keep the electric kettle's power plug, socket, power cord and automatic switching device dry and clean.
？
4, water should not exceed the highest water level, so as not to overflow the kettle when the liquid boils. Water should not be too little, otherwise it will soon dry, especially the siren type electric kettle, at least the water should be immersed in the heat pipe more than 20mm, otherwise the electric heat pipe is easy to come out of the water and burn out. In addition, it should be noted that do not first turn on the power supply and then fill the water, otherwise it is easy to burn the heater or cause dangerous accidents.
5, the use of electric kettle should be taken care of, to avoid dry burning. If no one takes care of, after the water is boiled, the whistle kettle of the infinite temperature device will always dry the water, and the electric kettle equipped with an automatic reset temperature controller will also dry the water due to repeated heating, and if the overtemperature protection function fails at this time, it will lead to a fire accident.
? 6, when using the electric kettle, be careful not to let the child touch the kettle body or touch the power cord, so as not to cause burns and other accidents.
? 7, just after boiling is still connected to the power of the electric kettle in the water or drink is easy to cause danger. In order to avoid boiling water burns, you should first unplug the plug, cut off the power supply and then use boiling water to ensure safety.
? 8, when cleaning, the automatic electric kettle can not be immersed in water or washed with water shower, so as to avoid damage to electrical insulation due to humidity, causing failure and leakage.
? 9, the electric kettle has been used for a long time, and the surface of the electric heat pipe has scale. Scale not only affects the thermal efficiency, but also causes the heat in the tube to increase rapidly and damage the electric heat pipe. Therefore, it should be checked regularly and cleaned according to the instructions.
? 10, do not repair the electric kettle by yourself. In the process of use, if the appliance is damaged and can not work normally, do not disassemble the shell for repair, and should be sent to the repair shop or the product's production factory for repair.
？
？
How to use Supor electric kettle
1. Place the power base on a flat table;
2. Gently press the lid button, open the lid, and inject appropriate amount of water;
3. Close the lid and place the kettle on the power base; (The pot must be used with the base!)
4. Plug the power cable into the 220V AC power supply.
5. Turn the boiling water switch to the sign \"on\
6. After the water boils for a few seconds, the boiling water switch will automatically jump off (jump to the sign \"off\"), cut off the power supply, and the indicator light will go out; At this time, press the heat preservation switch, the electric kettle enters the heat preservation state, and the heat preservation indicator lights up; The maximum holding temperature of the water level shall not be lower than 80℃ within 4 hours after boiling.
7. Lift the kettle to leave the base before pouring water;
8. After use, the kettle can be placed on the power base, but the power must be cut off.