1. The bus of the broadband network connects to the WAN port of the router, and the LAN port of the router connects to the computer.
2. After the device is started, open the browser and enter 192.168.1.1 in the address bar to go to the wireless router setting screen. (If you can't get in, please look at the nameplate at the bottom of the router or the router instruction manual, the default Settings of different models of routers are different.)
3. Enter the default account and password admin, or refer to the instructions.
4. After successful login, select the setting wizard interface, which will automatically pop up by default;
5, after selecting the setup wizard, a window will pop up to explain, you can set the basic parameters of the router through the wizard, directly click next;
6, according to the setup wizard set step by step, choose the Internet, usually ADSL users choose the first PPPoE, if you use other network service providers according to the actual situation to choose the following two, if you do not know how to choose, directly choose the first automatic selection can be easy for beginners to operate, select the next step;
7. Enter the account and password obtained from the network service provider, and directly enter the next step after completion;
8, set the wifi password, as far as possible the alphanumeric combination is more complex and not easy to be rubbed.
9. If the input is correct, the system will ask you whether to restart the router. If yes, restart the router and you can access the Internet normally.
one
If you want to connect the wall network port to the router, then just use the network cable to plug the router directly into the wall network port. After the wall network port is connected to the router, it can help users achieve the purpose of surfing the Internet at the same time.
two
The router is like a repeater, when the wan port of the router is connected to the wall network port by the network cable, the broadband network signal that is connected to the wall network port can be forwarded to the nearby Internet equipment through the router's antenna, so as to help the Internet equipment achieve the purpose of Internet access.
three
After the network cable is connected, you also need to connect the wan port of your wireless router at home.
1. This requires the external network to be connected to the network cable first.
2. It is recommended that a router switch be installed in a weak current box.
Use a network cable to connect the router directly to the wan interface, and change the third digit of the four-digit ip address of the wireless router in advance to prevent ip conflict