1, 720 full effect air purifier C400 humidifier companion using environmentally friendly carton packaging, after opening the package, you can see that there are customized foam protection inside.
2, the humidifying partner is assembled, the whole humidifying partner is made of high-quality ABS material, and is removable design, easy to clean and use.
3, with the humidification partner also comes with a water bag, red mark 2.9L, that is, the humidification partner can add a maximum of 2.9L of water.
4, the humidification partner is equipped with: upper cover, umbrella water guide cover, antibacterial humidification filter, nano silver antibacterial box, water tank body.
5, the anti-bacterial humidification filter is encircled on the shaft of the water tank, the use of anti-bacterial and anti-mold nanofiber materials, can effectively adsorb impurities in the water, prevent bacterial growth; At the same time, the mesh design is also more conducive to uniform humidification.
6, the front of the main body of the water tank is designed with a transparent scale design, and marked with the red logo of MAX, to ensure that we can see the height of the water surface from the outside of the water tank, to prevent too much water overflow; The two sides of the water tank are designed with a red overflow port, if too much water is added, the water will flow out of the overflow port.
7, the contact surface of the water tank and the purifier adopts the inverted concave design, and the place in direct contact with the purifier is designed with a rubber pad, which is very careful. At the same time, one corner is designed with a cutting Angle, and when combined with the purifier, we can ensure that we can use the touch button on the purifier.
8, the purifier C400 machine size is 26cm*26cm*52cm, that is, the height is about half a meter, and the length and width are 26cm, saving space at home. The whole purifier uses milky white as the main color, which is convenient to match with various home environments.
9, the front of the purifier is designed with an LED indicator, which can display green, yellow and red according to the quality of the air, PM shows green when 35 and below, 36-75 shows yellow, and more than 75 is red; It is convenient for us to quickly understand the air status of the house. There is a hidden display designed below the LED, which can not be seen without power, and can display the PM2.5 value after power, while there are small highlights below to indicate the air volume level, the maximum is 4 points. The front of the purifier has a 720 logo on the lower side.
10. The back and side of the purifier C400 are designed with a large number of air inlet holes, which can ensure the purification efficiency as much as possible. There is adhesive tape on the filter door, just tear it off before use.
11, the filter door adopts the magnetic design, and the design is easy to pull button, through the easy to pull button can easily open the door; After opening the door, you can directly see the filter cartridge, which is placed in a plastic bag.
12. The laser sensor of the purifier is hidden under the small cover plate, which can test the PM2.5 concentration in the room. The bottom of the back of the purifier is the power socket.
13, the air outlet design of the whole purifier is on the top, similar to the design of the humidifier cover, and the large area of the grid is more conducive to the air; And the four corners of the entire purifier are designed with rounded corners, which can effectively prevent accidental bumps. A touch button is designed on one corner of the top cover. From left to right, there are wifi pairing keys, sleep mode keys, automatic mode keys, wind speed adjustment keys, and on\/off keys. There are indicators above each touch button. The five touch buttons are also designed below the filter warning light, children's lock light.
14, the bottom close-up of the purifier. The bottom four corners are designed with non-slip foot pads, which can make the purifier more stable.
1 Press the power button to start the machine automatically into the automatic operation mode, at this time the motor gear is controlled by the sensor, when the PM2.5 value is less than 120, the motor runs one gear, the speed is 430 RPM. When the PM2.5 value shows 121-250, the motor runs in second gear at 600 RPM. When the PM2.5 value is less than 251-500, the motor runs in third gear at 900 RPM.
Wind speed: Press the wind speed key to change the gear of the motor, from first to third gear has been cycling. The second function of the wind speed key: the machine will exit the automatic operation function after the wind speed is artificially changed. (Press the wind speed key to release the automatic operation function)
2 Press the wind speed key to change the motor gear, from first to third gear has been cycling. The second function of the wind speed key: the machine will exit the automatic operation function after artificially modifying the wind speed. To enter the automatic function again, press the air volume key for 3 seconds.
3 After the sleep button is pressed, the electromechanical machine enters the first gear and exits the automatic mode. Then all lights and screens are turned off. The second function of the sleep key: reset the filter replacement prompt light when the filter replacement prompt light is on. (Hold for 3-5 seconds)
When the machine is running, the working time of the machine can be set through the timing key. The setting unit is hour, the minimum setting unit is half an hour, the maximum setting unit is 12 hours, and the setting step is half an hour (display: 00.30 1:001:30 -- 12:00). After the timing is finished, the display exits 5 seconds, and the display displays the value of PM2.5. After the timing takes effect, the countdown process is performed in the background in minutes. In the timing state, hold down the timing key for 5 seconds to exit the timing function. Press the timing key to display the current timing time.
4 Press the child lock key to enter the child lock function, and hold down the child lock key for 5 seconds to exit the child lock function. Long press the child lock key before entering the child lock function, then enter the machine to use the timing query function for accumulative use. At this time, the accumulated time from the first use of the machine is displayed, in hours, and the display will automatically exit after 5 seconds.
In startup mode, press the Auto key to select the auto mode.
Auto mode when ambient light < 5lx. Machine goes into sleep mode in three minutes. When the ambient light > 5lx, after 3 minutes, the machine exits the sleep mode and continues to operate in automatic mode