1. When the rear taillight of the car cannot be extinguished, it is necessary to check the brake light control switch of the motor vehicle, which may be a virtual connection or a short circuit of the control switch. In this case, it is necessary to repair the problem.
< br >
2, there may be a problem with the taillight line, go to the auto repair shop to check the line.
< br >
3, now there are many vehicles set the light delay function, generally after the lock of the car light delay for 5 minutes, encounter this situation without processing, you can also choose to turn off this function.
< br >
4, the car's brake system is faulty, it is possible to make the taillight steady on. The brake system needs to be checked and repaired in time.
< br >
5, there is another possibility that the abs sensor in the car is faulty, which will also cause the taillight to be steady on. The abs sensor needs to be checked and maintained in time.
< br >
6, the rear taillight of the car can not be extinguished, may be due to the brake is not completely released, due to the brake failure, resulting in the brake can not be fully open, in this case to check the brake of the vehicle, find the problem after the need for maintenance, the fault can be used normally.
< br >
7, the brake light is not back, repeatedly step on the brake pedal can be.
8, the brake fluid is missing, the brake disc can not be restored to the original position after the car stops, resulting in the car taillight steady on, add brake fluid.
< br >
9, brake disc wear to a certain extent, the car taillight is steady on. The brake pads need to be replaced.
The taillight switch of the vehicle may have a problem, or the front and middle contacts of the switch have electricity, and can only be repaired at the repair shop.
< br >
2, taillight wiring may have problems, you must go to the auto repair shop to check.
< br >
3, now many cars have a light delay function. Generally lock the car after turning on the light delay of 5 minutes. In this case, there is no need to deal with it. You can also choose to turn this feature off.
< br >
4, if the car's brake system fails, it may also cause the taillight to remain on.
< br >
5, there is also a possibility that the abs sensor in the car is faulty, which will also cause the taillight of the vehicle to be on.
If your Honda Fit taillight cannot be turned off, you can try the following workaround:
1. Check whether the taillight switch is off to ensure that there is no misoperation.
2. Check whether the taillight bulb is loose or burned out. If yes, replace the bulb with a new one.
3. Check whether the circuit connection is normal and ensure that there is no open or short circuit.
If the above methods cannot solve the problem, it is recommended that you contact a professional auto maintenance technician for further inspection and repair.
1, the lack of brake fluid, it is an indispensable part of the automobile brake system, when the driver steps on the brake pedal, the force stepped down from the pedal, the piston of the brake pump, through the brake fluid to transfer energy to the brake pump located in the wheel, so that the brake disc and the wheel contact, to prevent the vehicle from moving forward; Add brake fluid;
2, the taillight bulb is damaged, the brake fluid cup is divided into the line and the line, when the brake fluid inside is lower than the line, the phenomenon will be sensed by the sensor next to the oil cup, and reflected by the brake light on the instrument panel.
If the brake fluid is reduced quickly, the brake system is leaking; Replace the light bulb;
3, brake pads wear seriously, the light will be steady on, need to replace the brake pads.