1, first shut down, take out the sim card, take out the screws on both sides of the data cable interface.
< br >
2. Use a suction cup to hold the part of the screen near the Home button and pull out an opening.
< br >
3, note that the Angle between the front panel and the fuselage should not exceed 90 degrees, because there is a line at the top of the fuselage to connect the two.
< br >
4. We found that the bottom part lacks the Touch ID cable like 5s, which reduces the risk of disassembly.
< br >
5, in order to avoid short circuit of components in the disassembly process, we must first power off the motherboard and remove the shielding cover of the power connection line
< br >
6. Gently pry open the interface between the power supply and the motherboard with the pick.
< br >
7. Then we remove the shielding cover of the wiring part connected to the front panel.
< br >
8, also pry open the row one by one, a total of four. The four cables are display, Touch, fiber, and Touch ID
< br >
9. This is the front panel of the phone.
< br >
10. This is the back panel of the phone. This is the general disassembly of the mobile phone and then disassembly, please refer to various detailed disassembly methods on the Internet. This is what happens when the machine is completely dismantled.
1. The process of moving the board is relatively tedious. 2. Because the moving board needs to first determine the location and destination of the handling, and then prepare the handling tools and human resources to carry out the handling operation.
At the same time, it is necessary to consider the problems and safety measures that may be encountered during the handling process. 3. In the process of moving the board, it is also necessary to pay attention to the protection and safety of items in the handling process, as well as the coordination and communication in the handling process.
Therefore, the moving process requires adequate preparation and planning to ensure the smooth completion of the moving task.