1. Turn off the power and unplug the charging cable: If your Bluetooth headset cannot be charged after water, it is recommended to turn off the power and unplug the charging cable immediately to avoid short circuit or other problems.
2. Take out the battery and dry it: If the battery of your Bluetooth headset can be removed, try removing the battery and drying it before reinstalling it. This may bring the device back to normal.
3. Desiccant moisture absorption: You can use some moisture absorption agents, such as white rice or diatomaceous earth, etc., put the Bluetooth headset into a sealed bag, and put moisture absorption agent, and then wait for a period of time before trying to charge.
4. Send for repair: If the above methods are ineffective, it is recommended to send the equipment to a professional repair shop for inspection and repair to avoid damage to the equipment and circuit.
It should be noted that if your Bluetooth headset is flooded, try not to use heating equipment such as a hair dryer to dry it, so as not to cause more damage. At the same time, in daily use, you can pay attention to protect the Bluetooth headset to avoid the occurrence of water and falling.
This is because the water caused by short circuit, open circuit, circuit damage.
1. The power adapter may be damaged, replace the power plug;
< br >
2. There may be stains on the metal contacts inside the charging box, which can be cleaned up and used again;
< br >
3. The charging box may be damaged, you can contact after-sales maintenance.
< br >
Generally speaking, the headset and the headset case can be used for up to 5 hours after a full charge, and the continuous call time can be up to 2 hours. If the charging case is fully charged, after multiple charges, you can get more than 24 hours of listening time, or up to 11 hours of talk time. Take AirPods2 as an example, when the headset is out of power, it is placed in the charging case for 15 minutes, and there is a maximum of 2 hours of talk time.
Water in the earphone may cause a short circuit or circuit damage to the battery, and thus cannot be charged normally. In addition, moisture may also cause the battery to oxidize, further affecting the charging effect. It is recommended to take the headphones apart and clean them, and then dry them for a while before attempting to charge them. If the problem persists, you may need to replace the battery or repair the circuit.
reason
1. The charging box is flooded, resulting in no charge.
Earphone water, if the water is not much, you can first wipe the earphone dry water, and then put it in a ventilated place to dry, if a lot of water, it is best to dry the earphone, then put it into the charging bin inside charging.
2, the charging line is broken, if the charging line is charged, it is found that the charge is not charged, you can change a charging line to try.
3, the charging box or headset is damaged, if the charging box or headset is damaged, it will not be charged, this situation needs to be taken to repair.
Because the chip inside the earphone case is stained with water and rusted, it can't be charged.
No matter what you do at this time, you can't charge, so it's best to buy a new equivalent model
The earphone shorted out when it was flooded, so it couldn't be charged