Hello, to properly connect the 36V USB socket to the wire, you need to follow these steps:
1. Determine the polarity of the wire, usually the positive of the wire is extremely red, and the negative is extremely black.
2. Use a wire stripper or scissors to peel off the insulation layer of the wire. The strip length should be able to fit into the wiring hole of the socket, but not too long to avoid too long the wire.
3. Insert the cable into the wiring hole of the socket. Sockets usually have two wiring holes, one marked with a \"\" symbol and the other marked with a\" - \"symbol. Insert the positive electrode of the wire into the \"\" hole and the negative electrode into the\" - \"hole.
4. Tighten the screws on the socket using a screwdriver to secure the cable connection.
5. After the connection is complete, use a multimeter to check whether the wires are correctly connected to ensure the safety of the circuit.
considerations
1. Before connecting the wire, be sure to turn off the power to avoid electric shock or short circuit.
2. When selecting the socket, be sure to confirm whether its rated voltage and current match the wire.
3. When connecting the wire, pay attention to whether the insulation layer of the wire is damaged. If there is damage, it should be replaced in time.
4. When connecting the wire, be sure to keep the inside of the socket clean to ensure the quality of the connection.
The correct connection method of 36v USB socket cable is: 1. First select the correct power cable according to the polarity requirements of the socket, and ensure that the insulation layer of the power cable connector is not damaged.
2. Insert the connector of the power cable respectively, and connect the connector according to the label on the connector to ensure proper contact.
3. Close the socket cover and plug it in.
The reason for this connection is that the power cable fixed plug and its wiring port are polar design, if the connection is not correct, it may cause the electrical equipment to not work properly or damage the equipment.
At the same time, the interval between the socket and the power cable connector is small. The correct wiring can ensure that the plug is firmly connected, and the power cable is in good contact with the inside of the socket to avoid safety problems such as short circuit in the connection of the power cable.
It can be seen that correct wiring is essential to the normal operation of the equipment and personal safety.