1, the car antifreeze is generally added 5 liters to 6 liters, to be added twice. Add antifreeze generally pay attention to the following aspects: antifreeze should not be too little, but can be appropriately increased.
< br >
2, generally add 5 liters to 6 liters, to be divided into two times. The first is when the vehicle is static, the rubber tube is squeezed by hand while being added until the liquid level is between low and high. The second time is to drive a distance after the vehicle starts to observe whether the liquid level of the refrigerant drops.
< br >
3, the amount of car antifreeze to add, depending on the remaining amount of antifreeze in the car, if there is no remaining inside, it should be 6 liters to 7 liters, this situation is generally suitable for just assembled vehicles, and for the vehicles that are recharged after the row, generally 5 liters to 6 liters.
Jaguar XEL antifreeze generally needs to be filled to the top of the cooling system, which is at the highest water level of the coolant tank. When adding antifreeze, the original liquid in the cooling system should be discharged first, and then the accurate antifreeze should be added to the coolant tank.
In general, the amount of antifreeze filling is based on the model of the vehicle and the use of the environment, it is recommended to check the relevant vehicle manual or consult a professional car maintenance personnel. If the antifreeze is insufficient or excessive, it will have an adverse effect on the cooling system of the vehicle, and even cause damage to the engine.
A Jaguar x? e? Automotive antifreeze is generally added to 5 liters to 6 liters, to be added in two times. Add antifreeze generally should pay attention to the following aspects: 1, antifreeze should not be too little, but can be appropriately increased. Once there is no antifreeze inside the expansion tank, it can not be added when it is needed, and there will be a lack of automotive antifreeze, which will cause the engine to be abnormally high temperature, and even the cylinder pulling phenomenon, resulting in engine damage. Antifreeze can be appropriate to add more, more than the upper limit is generally not relevant, as long as the high temperature does not overflow.