step
1. Preparation: Ensure that the working area is clean, adjust the Jingdiao 80 to the appropriate working height, and fix the workpiece.
2. Set the tool: According to the needs of the bevel, select the appropriate tool, and install the tool on the machining head through the fixture or tool system.
3. Set the process parameters: according to the requirements of processing materials and bevels, set the appropriate processing speed, feed speed and cutting depth to ensure the quality and efficiency of workpiece processing.
4. Safety protection: Ensure the normal operation of the safety warning device of Jingdiao 80 equipment, wear personal protective equipment, such as gloves and goggles, to ensure safe operation.
5. Processing bevel: Start the Jingdiao 80 equipment, according to the set process parameters, with the appropriate cutting mode and direction, the workpiece is processed on the bevel. Control the movement of the machining head to ensure that the tool is processed in a predetermined path.
6. Check the processing quality: After machining the bevel, carefully check the flatness, slope and surface quality of the workpiece surface to ensure that the desired processing effect is achieved.
Please note that the above steps are the basic process for machining inclined surfaces in general, and the specific operation may vary depending on the material, shape and requirements. Before processing, please read the operation manual of Jingdiao 80 and adjust the processing parameters according to the actual situation. In addition, ensure that you comply with safety regulations during operation to ensure personal safety and normal use of the device.
The steps to make a bevel in fine carving are as follows:
Open the fine carving software and enter the drawing interface.
Select the Line tool in the toolbar and draw the two boundaries of the bevel you want to make on the canvas.
Select both boundaries, then select the Path option in the menu bar.
In the path setting dialog box that appears, select the \"bevel\" option, and then set the parameters of the bevel, such as the height and width of the bevel.
Click the OK button, and the software will automatically calculate the path of the bevel and process the file accordingly.
It should be noted that when making the bevel, it is necessary to ensure that the length and Angle of the two boundary lines are correct, otherwise the bevel may not meet the requirements. In addition, it is also necessary to select the appropriate processing parameters according to the specific processing requirements and material properties to ensure the accuracy and efficiency of the processing.