Jingdiao 80 is a CNC engraving machine control system software, setting machining coordinates is an important step before machining. The following are the basic steps to set the machining coordinates:
Open the Jingdiao 80 software and import the graphics file to be processed.
Select the \"Machining\" option on the software interface, and then set the machining parameters, including tool diameter, machining depth, feed speed, etc.
After the machining parameters are set, the machining coordinates need to be set. Select the \"Coordinate\" option on the software interface, you can see the display of the current coordinate system.
Move the cutter of the engraving machine to the starting position by manually moving the engraving machine or entering the coordinate value.
Enter the coordinate value of the position on the software interface as the origin of the machining coordinate.
According to the size and position of the graphics to be processed, set other parameters of the processing coordinate system, such as the range of X and Y axes.
It should be noted that when setting the machining coordinates, ensure that the coordinate system is set correctly to avoid deviations or errors during the machining process. At the same time, when setting the processing coordinates, it is also necessary to consider factors such as the radius and processing depth of the tool to ensure that the processed graphics meet the requirements.
In short, setting the machining coordinates is an important step before the processing of Jingdiao 80 software, which requires careful operation to ensure that the setting is correct.