If the filter is above the inner bucket of the washing machine (water channel filter type) disassembly method: pinch the filter slot by hand, pull up to remove, remove the wire chips in the filter, wash the filter with water once, when loading, align the left and right slot to press down can be installed in place.
two
\/ 3
If the filter is in the middle of the washing machine inner cylinder (left and right swing type) disassembly method: press the plastic slot above the filter with your thumb, press down hard, and then remove outwards, after removing the wire chips, wash the filter with water. When loading, it is necessary to pay attention to the lower side of the filter and the upper side can not be reversed, otherwise the filter can not be removed, the filter has the upper side and the lower side of the filter, see the lower side of the rear filter and insert it into the bayonet under the inner cylinder, and then press the plastic on the top of the slot and insert it into the upper bayonet.
three
\/ 3
When the washing machine filter is broken, it is generally to the appliance parts store to buy another one according to the old one to solve the problem; But if you can't find the right one, you can do it yourself, first cut off the broken net, use the \"nail polish\" used by women in the old frame as an adhesive, and stick on the old stockings instead of the net, you can get a filter net with a better filtering effect than the original.