First, smart seat filter replacement method:
1. Close the water inlet three-way valve;
Turn the new filter element clockwise into the original bayonet;
Second, nozzle replacement method:
Press " The \"nozzle cleaning\" button for 3 seconds, the female special nozzle is extended forward, one hand grasp the middle part of the extended nozzle rod, and one hand forcefully pull the female special nozzle from the front of the extended nozzle rod; Then use the hand to insert the new nozzle into the nozzle rod, and ensure that it is inserted in the end, and then press the \"stop\" key, the female nozzle is withdrawn; (Be careful when pulling out the nozzle to prevent the nozzle from breaking)
After the female-only nozzle is withdrawn, the butt cleaning nozzle is extended forward, hold the middle part of the outstretched nozzle rod with one hand, and pull out the butt cleaning nozzle from the nozzle rod with one hand; Then insert the new nozzle into the nozzle rod, and put it into the end, and then press the \"stop\" key, after the hip cleaning function is recovered, the seat device enters the normal work. (Be careful when pulling out the nozzle to prevent the nozzle from breaking)
①, close the inlet Angle valve, stop the water. Note: When the inlet Angle valve is still open, do not remove the inlet filter, otherwise water will spray out.
②, remove the water filter.
③, cleaning, the filter will be removed after the water attached to the filter will be washed clean the general small garbage, please use a toothbrush and other things to clean up the volume of the garbage, please use cotton swabs and other things to remove it.
4, install the water filter, reinstall it with the installation tool to tighten it, otherwise it will cause water leakage. Note: Please firmly tighten the inlet filter, otherwise it may cause water leakage.
⑤, open the inlet Angle valve, please confirm whether the inlet Angle valve is leaking. Note: Do not use detergent when cleaning the filter, use tap water to clean. Do not force out the filter, otherwise it may be deformed or broken.
Nozzle: Press the nozzle cleaning key, there will be water overflow around the nozzle, for nozzle cleaning; Pull out the nozzle by hand and hold it firmly, clean the nozzle and tube head; When cleaning, soft cloth can be washed with water; Finally, press the stop button to stop the water.