A lot, first of all to check the data cable, data cable damage or dirty charging port will lead to automatic stop, you can clean up the charging port or change a normal charging data cable.
Secondly, we must consider whether there is a problem with the system, you can restore to the original factory setting mode, if the automatic stop problem is solved after the recovery, then the system setting is wrong, if there is still an automatic stop phenomenon, then it is not the problem of the system setting.
If it is not caused by the above two reasons, then it is necessary to consider the battery damage, after the battery damage, the voltage and power of the charging bank will have a certain impact, at this time it is easy to automatically stop the problem, you need to be sent to the special maintenance point in time for maintenance.
To encounter such a problem, there are two situations:
1. There may be a problem with the charging interface of your mobile phone, use your own mobile phone charger to plug it in and charge it to see if it can be flushed into the electricity.
2. There is a problem with your charging bank, the charging output module misjudged it as a short circuit, and it will automatically power off protection once it is charged.
3. There is also a case to look at the joints at both ends of your data line to see if it is damaged by fatigue, if not, change a data line to try it.