KND numerical control can be transmitted through different ways, the specific transmission methods are: 1. Use USB flash drive transmission: the written program is saved on the USB flash drive, and then inserted into the USB interface of the CNC machine tool for transmission. 2. Use serial line transmission: Connect the computer to the CNC machine tool through the serial line, and use specific software to transfer the program to the CNC system.
3. Transmission through the network: Upload the written program to the CNC machine tool through the network, you can use FTP, Telnet and other means of transmission. In the actual transmission process, it should also be noted that the size of the program file, encoding format, transmission speed and other factors will affect the efficiency and success rate of transmission.
Therefore, it is necessary to select the appropriate transmission mode and parameter Settings according to the actual situation.
(1) a single program is input to the numerical control system by the PC a) Open the program switch, select the \"editing method\
b) Press address key O and program number in sequence;
c) Press [Input] key, then the screen status line will display \"Input\";
d) Run the communication software KND serial Port communication 3.0 on the PC, select the communication port, set the baud rate and the CNC system so that the PC is in the input waiting state;
e) Call in the program to be transmitted on the PC, and make it in the output state, the program is transmitted from the PC to the CNC system.
(2) A number of programs are input into the numerical control system by the PC, and the contents of a file composed of multiple programs are passed into the numerical control system. The file format is as follows: The procedure is the same as the previous one.