1. It is recommended to try after re-plugging the charger and data cable. If the speed of inserting the phone is too slow or not inserted in place, the phone may recognize the ordinary charging mode.
< br >
2. You are advised to use Huawei standard charger and data cable. Check the charger and data cable during charging.
< br >
3. Both the phone and charger support fast charge\/Super fast charge mode, and the charging mode is the same. You can enter the 9V\/2A fast charge mode only when both the phone and charger support the 9V\/2A Huawei fast charge.
< br >
4. Data line type and data line impedance meet the requirements of super fast charge. For A 5V\/4.5A Huawei Super Fast charger, the data cable must be 5A or a higher type (non-standard data cables may not identify the data cable type), and the impedance of the data cable meets the requirements of the super fast charger.
Generally, the charging head and the data line do not match
The specific reasons are as follows: 1: It is recommended to try after reinserting the charger and data cable, if the data cable is not inserted in place or the insertion speed is too slow, it may be identified as an ordinary charging mode.
2: Please: Check the connection status of the device, data cable, charger and socket. If you find a foreign body or dirt in the interface, it is recommended that you clean it in time (use a clean soft brush, if conditions can be stained with alcohol). If you find that the interface is not fully inserted, or there is an obvious loosening, it is recommended to re-plug it!